BTS500101TADATMA1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | TO-263-7, D2Pak (6 Leads + Tab), TO-263CB |
| Surface Mount | YES |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| Series | Automotive, AEC-Q100, Reversave™ |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Additional Feature | SEATED HGT-NOM |
| Max Power Dissipation | 200W |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 13.5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| JESD-30 Code | R-PSSO-G6 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Supply Voltage-Min (Vsup) | 8V |
| Interface | On/Off |
| Output Configuration | High Side |
| Output Current | 40A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Nominal Input Voltage | 18V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 8V~18V |
| Fault Protection | Over Temperature, Over Voltage, Reverse Battery, Short Circuit |
| Turn On Time | 700 μs |
| Output Peak Current Limit-Nom | 48A |
| Rds On (Typ) | 1.6m Ω |
| Max Junction Temperature (Tj) | 150°C |
| Turn Off Time | 735 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Height | 4.7mm |
| Width | 9.25mm |
| RoHS Status | Non-RoHS Compliant |
BTS500101TADATMA1 Overview
A Tape & Reel (TR) is used to package it.In the TO-263-7, D2Pak (6 Leads + Tab), TO-263CB package, it is included.Mounting type Surface Mount is selected for the LED driving board.The switch type is General Purpose.It is best to set the temperature to -40°C~150°C TJ to ensure reliable operation.The LED driver has a total of 1 outputs.The LED driving board operates at Not Required volts.It produces a maximum output voltage of N-Channel volts at its maximum output.A total of 6 terminations have been recorded.It contains 1 functions.Using a voltage of 13.5V allows for high efficiency.The Automotive, AEC-Q100, Reversave? series includes this electrical component.This case has the output current set to 40A.A normal operation requires that the supply voltage (Vsup) remain above 8V.In addition, SEATED HGT-NOM can be produced using this LED driving board.
BTS500101TADATMA1 Features
Supplied from 13.5V
Additional features like SEATED HGT-NOM
BTS500101TADATMA1 Applications
There are a lot of Infineon Technologies BTS500101TADATMA1 Power Switches ICs applications.
- USB Power Distribution
- Hard Disk Drives
- PDAs
- Smartphone and PDA
- Hot Swap
- Portable Devices
- Portable/Handheld Devices
- PC Cards
- USB Ports/Hubs
- Notebook PC
