BTS500151TAAATMA1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-263-7, D2Pak (6 Leads + Tab) |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Terminal Finish | TIN |
| Max Power Dissipation | 200W |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 13.5V |
| JESD-30 Code | R-PSSO-G7 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 33A |
| Supply Voltage-Min (Vsup) | 8V |
| Interface | On/Off |
| Nominal Supply Current | 1.2mA |
| Output Configuration | High Side |
| Power Dissipation | 200W |
| Output Current | 33A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~28V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Turn On Time | 700 μs |
| Output Peak Current Limit-Nom | 33A |
| Turn Off Time | 700 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
| Width | 9.25mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
BTS500151TAAATMA1 Overview
As you can see, it's packaged in the way of a Tape & Reel (TR).There is a package for it in the TO-263-7, D2Pak (6 Leads + Tab) package.The lighting driver has the mounting type Surface Mount.There is a switch type of General Purpose.To ensure reliable performance, the temperature should be set to -40°C~150°C TJ.It is possible to use 1 outputs in the lighting driver.The LED driving board operates at Not Required volts.There is a maximum output voltage of N-Channel volts.A total of 7 terminations have been found in it.As far as functions are concerned, the lighting driver has 1.In order to meet the operation criteria, the maximum output current drops to 33A.High efficiency is possible at 13.5V supply voltage.The lighting driver is mounted in the way of Surface Mount.This electrical component is part of the Automotive, AEC-Q100 series.In this case, the output current is set to 33A.Normal operation requires a voltage above 8V for the supply voltage.
BTS500151TAAATMA1 Features
Supplied from 13.5V
BTS500151TAAATMA1 Applications
There are a lot of Infineon Technologies BTS500151TAAATMA1 Power Switches ICs applications.
- USB3.1 Power Delivery
- Hot Swaps
- Wireless Headsets
- USB Protection
- Low Voltage I/O System Power
- Storage Drives
- Set-Top Boxes
- Wireless/Networking Cards
- Mobile Communication Devices
- Solid-State Drives
