Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
36-BSSOP (0.295, 7.50mm Width) |
Operating Temperature |
-40°C~150°C TJ |
Packaging |
Tape & Reel (TR) |
Published |
2012 |
Series |
PROFET® |
Feature |
Slew Rate Controlled |
Pbfree Code |
yes |
Part Status |
Not For New Designs |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
36 |
ECCN Code |
EAR99 |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
NOT SPECIFIED |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
JESD-30 Code |
R-PDSO-G36 |
Number of Outputs |
2 |
Output Type |
N-Channel |
Supply Voltage-Min (Vsup) |
4.5V |
Interface |
Parallel |
Current - Output (Max) |
11A |
Output Configuration |
High Side |
Voltage - Supply (Vcc/Vdd) |
4.5V~5.5V |
Input Type |
Non-Inverting |
Switch Type |
General Purpose |
Nominal Input Voltage |
5.5V |
Ratio - Input:Output |
1:1 |
Voltage - Load |
6V~28V |
Fault Protection |
Over Temperature, Over Voltage, Short Circuit |
Screening Level |
AEC-Q100 |
Turn On Time |
640 μs |
Output Peak Current Limit-Nom |
11A |
Rds On (Typ) |
4m Ω |
Supply Voltage1-Nom |
13.5V |
Turn Off Time |
340 μs |
Built-in Protections |
TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
Output Current Flow Direction |
SINK |
Supply Voltage1-Min |
6V |
Width |
7.6mm |
RoHS Status |
ROHS3 Compliant |
BTS500402SFAXUMA2 Overview
Tape & Reel (TR) is how it's packaged.It is included in the package 36-BSSOP (0.295, 7.50mm Width).It has been mounted as Surface Mount on the LED driver.General Purpose is the switch type it owns.It is recommended that the temperature be set to -40°C~150°C TJ for reliable operation.The LED driver has 2 outputs.The LED driving board operates with a supply voltage of 4.5V~5.5V.It produces a maximum output voltage of N-Channel volts at its maximum output.A lighting driver with Slew Rate Controlled features is available.The termination count is 36.As far as functions are concerned, the lighting driver has 1.In terms of output, the lighting driver can provide a maximum of 11A V.As long as the supply voltage is 5V, high efficiency can be achieved.As a result, it is mounted in the manner of Surface Mount.It is included in the PROFET? series.In order for this lighting driver to operate normally, the supply voltage (Vsup) should remain above 4.5V.
BTS500402SFAXUMA2 Features
Supplied from 5V
BTS500402SFAXUMA2 Applications
There are a lot of Infineon Technologies BTS500402SFAXUMA2 Power Switches ICs applications.
- Smartphone and PDA
- Storage (HDDs, SSDs)
- PC Cards
- USB3.1 Power Delivery
- Portable Music Players
- Portable Devices
- HDD and SSD
- Wireless Headsets
- Portable GPS
- Various applications equipped with buttons