banner_page

BTS500551TMBAKSA1

N-Channel PMIC PROFET? Series BTS50055 7 Pin 12V TO-220-7 (Formed Leads)


  • Manufacturer: Infineon Technologies
  • Nocochips NO: 376-BTS500551TMBAKSA1
  • Package: TO-220-7 (Formed Leads)
  • Datasheet: PDF
  • Stock: 203
  • Description: N-Channel PMIC PROFET? Series BTS50055 7 Pin 12V TO-220-7 (Formed Leads) (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Through Hole
Mounting Type Through Hole
Package / Case TO-220-7 (Formed Leads)
Number of Pins 7
Operating Temperature -40°C~150°C TJ
Packaging Tube
Published 2010
Series PROFET®
JESD-609 Code e3
Feature Auto Restart
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 7
ECCN Code EAR99
Terminal Finish Tin (Sn)
Additional Feature REVERSE BATTERY PROTECTION
Max Power Dissipation 170W
Technology MOS
Terminal Position ZIG-ZAG
Number of Functions 1
Supply Voltage 12V
Base Part Number BTS50055
Number of Outputs 1
Output Type N-Channel
Supply Voltage-Min (Vsup) 5V
Interface On/Off
Current - Output (Max) 70A
Nominal Supply Current 800μA
Output Configuration High Side
Power Dissipation 170W
Output Current 13.6A
Voltage - Supply (Vcc/Vdd) Not Required
Input Type Non-Inverting
Switch Type General Purpose
Halogen Free Halogen Free
Nominal Input Voltage 34V
Ratio - Input:Output 1:1
Voltage - Load 5V~34V
Fault Protection Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage
Turn On Time 420 μs
Output Peak Current Limit-Nom 0.4A
Rds On (Typ) 4.4m Ω
Built-in Protections TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Contains Lead

BTS500551TMBAKSA1 Overview


It is packaged in the manner of a Tube.There is a package for it in the TO-220-7 (Formed Leads) package.Mounting type Through Hole is selected for the LED driving board.The switch type of this switch is General Purpose.In order to guarantee reliable performance, the temperature should be set to -40°C~150°C TJ.The lighting driver is equipped with 1 outputs that can be used.Operation is based on Not Required supply voltage.It has a maximum output voltage of N-Channel volts.As far as features are concerned, the LED driving board has Auto Restart.It belongs to the family BTS50055.The termination count is 7.For operation, 7 pins are used.It is important to note that the LED driving board has 1 functions.In terms of output, the lighting driver can provide a maximum of 70A V.It is possible to achieve a high level of efficiency with a supply voltage of 12V.This lighting driver is mounted in the way of Through Hole.It is included in the PROFET? series.In this case, the output current will be set to 13.6A.For normal operation, the supply voltage (Vsup) should be kept above 5V.This LED driver can also produce REVERSE BATTERY PROTECTION.

BTS500551TMBAKSA1 Features


Supplied from 12V
Additional features like REVERSE BATTERY PROTECTION

BTS500551TMBAKSA1 Applications


There are a lot of Infineon Technologies BTS500551TMBAKSA1 Power Switches ICs applications.

  • Hot Swap
  • Notebook PC
  • Solid State Drivers
  • Wireless/Networking Cards
  • Handheld Devices
  • Portable GPS Device
  • PC Card Hot Swap
  • Wireless Modem Data Cards
  • Set-Top Boxes
  • Mobile Communication Devices

Write a review

Note: HTML is not translated!
    Bad           Good