BTS500601TEAAUMA2
| Parameters | |
|---|---|
| Resistance | 6.8mOhm |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | BTS50060 |
| JESD-30 Code | R-PSSO-G4 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 16.5A |
| Supply Voltage-Max (Vsup) | 5V |
| Supply Voltage-Min (Vsup) | 3.3V |
| Interface | On/Off |
| Nominal Supply Current | 12mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Halogen Free | Halogen Free |
| Output Current per Channel | 16.5A |
| Nominal Input Voltage | 13.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 6V~19V |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage, UVLO |
| Output Peak Current Limit-Nom | 75A |
| Rds On (Typ) | 6.8m Ω |
| Built-in Protections | OVER CURRENT; OVER VOLTAGE; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Width | 6.22mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-252-5, DPak (4 Leads + Tab), TO-252AD |
| Number of Pins | 5 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| Series | PROFET® |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
BTS500601TEAAUMA2 Overview
The package is in the form of a Tape & Reel (TR).It is included in the package TO-252-5, DPak (4 Leads + Tab), TO-252AD.The mounting type of the LED driver is Surface Mount.General Purpose is the type of switch owned by it.It is recommended that the temperature be set to -40°C~150°C TJ for reliable operation.The lighting driver has a total of 1 outputs that are available for use.It uses a supply voltage of Not Required to operate.It has a maximum output voltage of P-Channel volts.This object belongs to the BTS50060 family.There are 4 terminations in it.The 5 pins are used to operate the LED driver.Currently, there are 1 functions associated with the lighting driver.It is necessary to reduce the maximum output current to 16.5A to meet the operation criteria.Surface Mount is mounted in the way.6.8mOhm is the resistance of the lighting driver.A component of this type is included in the PROFET? series.The Vsup value (maximum supply voltage) is set to 5V.For normal operation, the supply voltage (Vsup) should be kept above 3.3V.
BTS500601TEAAUMA2 Features
Resistance of 6.8mOhm
BTS500601TEAAUMA2 Applications
There are a lot of Infineon Technologies BTS500601TEAAUMA2 Power Switches ICs applications.
- Set-top-box
- USB3.1 Power Delivery
- Mobile Communication Devices
- Portable Video Game Players
- Hot Swap
- Wireless Headsets
- Handheld Devices
- USB Ports/Hubs
- PC Card Hot Swap
- Portable Music Players
