banner_page

BTS500701EGAAUMA1

N-Channel PMIC PROFET? Series BTS50070 12 Pin 13.5V 12-BSOP (0.295, 7.50mm Width) Exposed Pad


  • Manufacturer: Infineon Technologies
  • Nocochips NO: 376-BTS500701EGAAUMA1
  • Package: 12-BSOP (0.295, 7.50mm Width) Exposed Pad
  • Datasheet: PDF
  • Stock: 252
  • Description: N-Channel PMIC PROFET? Series BTS50070 12 Pin 13.5V 12-BSOP (0.295, 7.50mm Width) Exposed Pad (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 12-BSOP (0.295, 7.50mm Width) Exposed Pad
Number of Pins 12
Operating Temperature -40°C~150°C TJ
Packaging Tape & Reel (TR)
Published 2009
Series PROFET®
Feature Auto Restart
Part Status Obsolete
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 12
ECCN Code EAR99
Terminal Position DUAL
Terminal Form GULL WING
Number of Functions 1
Supply Voltage 13.5V
Base Part Number BTS50070
Number of Outputs 1
Output Type N-Channel
Max Output Current 14A
Supply Voltage-Min (Vsup) 9V
Interface On/Off
Nominal Supply Current 24mA
Output Configuration High Side
Output Current 14A
Voltage - Supply (Vcc/Vdd) Not Required
Switch Type General Purpose
Halogen Free Halogen Free
Ratio - Input:Output 1:1
Voltage - Load 9V~16V
Fault Protection Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage
Turn On Time 500 μs
Rds On (Typ) 7m Ω
Turn Off Time 500 μs
Built-in Protections TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL
Height Seated (Max) 2.6mm
Length 7.5mm
Width 6.4mm
Radiation Hardening No
RoHS Status RoHS Compliant
Lead Free Contains Lead

BTS500701EGAAUMA1 Overview


Tape & Reel (TR) is the way it's packaged.It's included in the 12-BSOP (0.295, 7.50mm Width) Exposed Pad package.The lighting driver has the mounting type Surface Mount.There is a switch type of General Purpose.In order to guarantee reliable performance, the temperature should be set to -40°C~150°C TJ.The LED driver has 1 outputs.In order to operate, it requires a voltage supply of Not Required.A maximum output voltage of N-Channel volts can be obtained with this LED driver.As far as features are concerned, the LED driving board has Auto Restart.It belongs to the BTS50070 family.A total of 12 terminations have been recorded.For operation, 12 pins are used.It consists of 1 functions.Maximum output current falls to 14A when operation criteria are met.With a supply voltage of 13.5V, high efficiency is possible.The lighting driver is mounted in the way of Surface Mount.This electrical component is included in the PROFET? series.In this case, the output current will be set to 14A.Normal operation requires Vsup above 9V.

BTS500701EGAAUMA1 Features


Supplied from 13.5V

BTS500701EGAAUMA1 Applications


There are a lot of Infineon Technologies BTS500701EGAAUMA1 Power Switches ICs applications.

  • Portable/Handheld Devices
  • PDAs
  • HDD, SSD
  • Smart Phones, Feature Phones
  • Portable Devices
  • HDD and SSD
  • Hot Swap
  • PC Card Hot Swap
  • Notebook PC
  • PC Cards

Write a review

Note: HTML is not translated!
    Bad           Good