BTS500801TMBAKSA1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-220-7 |
| Number of Pins | 7 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2008 |
| Series | PROFET® |
| JESD-609 Code | e3 |
| Feature | Auto Restart |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Additional Feature | REVERSE BATTERY PROTECTION |
| Terminal Position | SINGLE |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | BTS50080 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Supply Voltage-Min (Vsup) | 5.5V |
| Interface | On/Off |
| Nominal Supply Current | 1.4mA |
| Output Configuration | High Side |
| Output Current | 9.5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Halogen Free | Halogen Free |
| Nominal Input Voltage | 38V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~38V |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Turn On Time | 550 μs |
| Output Peak Current Limit-Nom | 12A |
| Rds On (Typ) | 7m Ω |
| Turn Off Time | 600 μs |
| Built-in Protections | TRANSIENT; OVER VOLTAGE; THERMAL |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
BTS500801TMBAKSA1 Overview
As you can see, it's packaged in the way of a Tube.This package is included in TO-220-7.In this case, the LED driving board is mounted as Through Hole.This switch is of type General Purpose.The temperature should be set to -40°C~150°C TJ to ensure reliable functioning.The LED driver is equipped with 1 outputs.A voltage of Not Required is used to power it.The maximum output voltage is N-Channel volts.In terms of features, the LED driving board has Auto Restart.The BTS50080 family consists of this type.As a result, there are 7 terminations.During operation, the 7 pins are used.As far as the lighting driver is concerned, there are 1 functions.A supply voltage of 12V leads to high efficiency.This lighting driver is mounted in the way of Through Hole.It is part of the PROFET? series.In this case, the output current will be set to 9.5A.To maintain a normal operation, the supply voltage (Vsup) must be maintained above 5.5V.As a result of using this lighting driver, REVERSE BATTERY PROTECTION can also be produced.
BTS500801TMBAKSA1 Features
Supplied from 12V
Additional features like REVERSE BATTERY PROTECTION
BTS500801TMBAKSA1 Applications
There are a lot of Infineon Technologies BTS500801TMBAKSA1 Power Switches ICs applications.
- USB Power Distribution
- Portable Devices
- Solid State Drivers
- Set-Top Boxes
- Wireless Modem Data Cards
- PC Cards
- Portable GPS
- Storage (HDDs, SSDs)
- USB Ports/Hubs
- Set-top-box
