BTS50081EKBXUMA1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) Exposed Pad |
| Number of Pins | 14 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| Series | PROFET® |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| ECCN Code | EAR99 |
| Resistance | 16mOhm |
| Terminal Finish | Tin (Sn) |
| Max Power Dissipation | 2W |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 11A |
| Operating Supply Voltage | 13.5V |
| Interface | On/Off |
| Nominal Supply Current | 5mA |
| Output Configuration | High Side |
| Power Dissipation | 2W |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 11A |
| Input Type | Non-Inverting |
| Turn On Delay Time | 250 μs |
| Switch Type | General Purpose |
| Halogen Free | Halogen Free |
| Nominal Input Voltage | 13.5V |
| Turn-Off Delay Time | 250 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5V~28V |
| Fault Protection | Open Load Detect, Over Temperature, Over Voltage |
| Rds On (Typ) | 8m Ω |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BTS50081EKBXUMA1 Overview
The LED driver's packaged as a Tape & Reel (TR).It is included with the 14-SOIC (0.154, 3.90mm Width) Exposed Pad package as well.The lighting driver is mounted in the Surface Mount position.It owns General Purpose switch type.To ensure reliable operation, set the temperature to -40°C~150°C TJ.The LED driver has a total of 1 outputs.The LED driving board operates at Not Required volts.It produces a maximum output voltage of N-Channel volts at its maximum output.14 pins are used for operation.To meet the operation criteria, the maximum output current drops to 11A.In this case, it is mounted in the way of Surface Mount.It has 16mOhm resistance.There is an electrical component included in the PROFET? series.When using this LED driving board, it is recommended that the supply voltage is set to 13.5V.A maximum current requirement of 11A is required for its operation.
BTS50081EKBXUMA1 Features
Resistance of 16mOhm
BTS50081EKBXUMA1 Applications
There are a lot of Infineon Technologies BTS50081EKBXUMA1 Power Switches ICs applications.
- Notebook and Tablet Computers
- Wearable Devices
- Portable Music Players
- Low Voltage I/O System Power
- Solid-State Drives
- Notebook PC
- USB Power Distribution
- Wireless/Networking Cards
- USB Ports/Hubs
- Storage (HDDs, SSDs)
