BTS50090-1TMB
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | TO-220-7 |
| Surface Mount | YES |
| Number of Pins | 7 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2008 |
| Series | PROFET® |
| Feature | Auto Restart |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Resistance | 8mOhm |
| Subcategory | Peripheral Drivers |
| Technology | MOS |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | BTS50090 |
| Pin Count | 3 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 55A |
| Supply Voltage-Max (Vsup) | 24V |
| Supply Voltage-Min (Vsup) | 5.5V |
| Interface | On/Off |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Halogen Free | Not Halogen Free |
| Output Current per Channel | 9A |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~38V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Turn On Time | 600 μs |
| Output Peak Current Limit-Nom | 11A |
| Rds On (Typ) | 8m Ω |
| Turn Off Time | 600 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| RoHS Status | RoHS Compliant |
BTS50090-1TMB Overview
As a result, it is packaged in the form of a Tube.There is a TO-220-7 package that includes it.A Through Hole mounting is used for the LED driving board.There is a switch type of General Purpose.The temperature should be set to -40°C~150°C TJ to ensure reliable functioning.As a default, the output is set to 1.A voltage of Not Required is used to power it.A maximum voltage of N-Channel volts is available from the output of this LED driver.There are Auto Restart features available on the LED driving board.The BTS50090 family contains this object.A total of 7 terminations can be found in it.In order to operate, the 7 pins are used.The LED driving board has a total of 1 functions.The maximum output current is reduced to 55A to meet the operation criteria.Supply voltages of 12V allow for high efficiency.The LED driver has a total of 3 pins.8mOhm resistance is present in the lighting driver.This electrical component is included in the PROFET? series.There is a Peripheral Drivers capacity container for this LED driver that is self-contained.The lighting driver is configured to have a maximum supply voltage of 24V (Vsup).Normal operation requires a voltage above 5.5V for the supply voltage.
BTS50090-1TMB Features
Supplied from 12V
Resistance of 8mOhm
BTS50090-1TMB Applications
There are a lot of Infineon Technologies BTS50090-1TMB Power Switches ICs applications.
- Hard Disk Drives
- Solid State Drivers
- USB Power Distribution
- Portable GPS
- Telecom and Network Systems
- HDD and SSD
- Portable/Handheld Devices
- HDD, SSD
- Gaming
- Wireless Headsets
