Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
14-SOIC (0.154, 3.90mm Width) Exposed Pad |
Number of Pins |
14 |
Operating Temperature |
-40°C~150°C TJ |
Packaging |
Tape & Reel (TR) |
Published |
2012 |
Series |
PROFET® |
JESD-609 Code |
e3 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
14 |
ECCN Code |
EAR99 |
Terminal Finish |
Matte Tin (Sn) |
Max Power Dissipation |
2W |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
NOT SPECIFIED |
Number of Functions |
1 |
Supply Voltage |
13.5V |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Pin Count |
14 |
Number of Outputs |
1 |
Output Type |
N-Channel |
Max Output Current |
10A |
Supply Voltage-Max (Vsup) |
28V |
Supply Voltage-Min (Vsup) |
5V |
Interface |
On/Off |
Nominal Supply Current |
5mA |
Output Configuration |
High Side |
Power Dissipation |
2W |
Output Current |
10A |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Input Type |
Non-Inverting |
Switch Type |
General Purpose |
Halogen Free |
Halogen Free |
Nominal Input Voltage |
13.5V |
Ratio - Input:Output |
1:1 |
Voltage - Load |
5V~28V |
Fault Protection |
Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
Turn On Time |
250 μs |
Output Peak Current Limit-Nom |
10A |
Rds On (Typ) |
12m Ω |
Turn Off Time |
250 μs |
Built-in Protections |
TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
Length |
8.65mm |
Width |
3.9mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
BTS50121EKBXUMA1 Overview
As you can see, it's packaged in the way of a Tape & Reel (TR).The 14-SOIC (0.154, 3.90mm Width) Exposed Pad package contains it.This lighting drivere has a mounting type of Surface Mount.General Purpose is the type of switch owned by it.It is best to set the temperature to -40°C~150°C TJ to ensure reliable operation.There is a default setting of 1 for output.A voltage of Not Required is used to power it.The maximum output voltage of this LED driver is N-Channel volts.In total, there are 14 terminations.The operation is performed through the 14 pins.Currently, the lighting driver has a total of 1 functions.In order to meet the operation criteria, the maximum output current drops to 10A.High efficiency is possible at 13.5V supply voltage.Surface Mount is mounted in the way of this LED driving board.It is equipped with a total of 14 pins.There is an electrical component included in the PROFET? series.When this case is used, the output current is set to 10A.The maximum supply voltage for this LED driver is 28V (Vsup).To maintain a normal operation, the supply voltage (Vsup) must be maintained above 5V.
BTS50121EKBXUMA1 Features
Supplied from 13.5V
BTS50121EKBXUMA1 Applications
There are a lot of Infineon Technologies BTS50121EKBXUMA1 Power Switches ICs applications.
- Low Voltage I/O System Power
- Hot Swap
- Various applications equipped with buttons
- Solid State Drivers
- Hard Disk Drives
- Smart Phones, Feature Phones
- Wireless Headsets
- Set-top-box
- Gaming
- Handheld Devices