Parameters |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
TO-252-5, DPak (4 Leads + Tab), TO-252AD |
Number of Pins |
5 |
Operating Temperature |
-40°C~150°C TJ |
Packaging |
Tape & Reel (TR) |
Published |
2008 |
Series |
PROFET® |
Feature |
Auto Restart |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
4 |
ECCN Code |
EAR99 |
Additional Feature |
REVERSE BATTERY PROTECTION |
Technology |
MOS |
Terminal Position |
SINGLE |
Terminal Form |
GULL WING |
Number of Functions |
1 |
Supply Voltage |
12V |
Base Part Number |
BTS5014 |
Pin Count |
4 |
JESD-30 Code |
R-PSSO-G4 |
Number of Outputs |
1 |
Output Type |
N-Channel |
Interface |
On/Off |
Nominal Supply Current |
1.4mA |
Output Configuration |
High Side |
Output Current |
6A |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Input Type |
Non-Inverting |
Switch Type |
General Purpose |
Halogen Free |
Halogen Free |
Nominal Input Voltage |
20V |
Ratio - Input:Output |
1:1 |
Voltage - Load |
5.5V~20V |
Fault Protection |
Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
Output Peak Current Limit-Nom |
11.1A |
Rds On (Typ) |
14m Ω |
Built-in Protections |
TRANSIENT; OVER CURRENT; UNDER VOLTAGE |
Width |
6.22mm |
BTS5014SDAAUMA1 Overview
As a result, it is packaged in the form of a Tape & Reel (TR).It is included in the package TO-252-5, DPak (4 Leads + Tab), TO-252AD.The lighting driver has the mounting type Surface Mount.The switch type is General Purpose.To ensure reliable operation, set the temperature to -40°C~150°C TJ.As a default, the output is set to 1.Operation is based on a supply voltage of Not Required.A maximum output voltage of N-Channel volts can be obtained with this LED driver.In terms of features, the LED driving board has Auto Restart.This object belongs to the BTS5014 family.It consists of 4 terminations in total.The 5 pins are used to operate the LED driver.As far as functions are concerned, the lighting driver has 1.Supply voltages of 12V allow for high efficiency.Surface Mount is mounted in the way of this LED driving board.This LED driver is equipped with a total of 4 pins.It is part of the PROFET? series.When this is the case, the output current is set to 6A.With this LED driver, REVERSE BATTERY PROTECTION can also be produced.
BTS5014SDAAUMA1 Features
Supplied from 12V
Additional features like REVERSE BATTERY PROTECTION
BTS5014SDAAUMA1 Applications
There are a lot of Infineon Technologies BTS5014SDAAUMA1 Power Switches ICs applications.
- Hot Swaps
- HDD and SSD
- PDAs
- Portable/Handheld Devices
- Smartphone and PDA
- Portable GPS
- Hard Disk Drives
- Mobile Communication Devices
- Gaming
- Solid-State Drives