Parameters |
Nominal Supply Current |
3.5mA |
Output Configuration |
High Side |
Power Dissipation |
1.8W |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Input Type |
Non-Inverting |
Switch Type |
General Purpose |
Halogen Free |
Halogen Free |
Nominal Input Voltage |
13.5V |
Ratio - Input:Output |
1:1 |
Voltage - Load |
5V~28V |
Fault Protection |
Current Limiting (Fixed), Open Load Detect, Over Temperature |
Turn On Time |
230 μs |
Output Peak Current Limit-Nom |
6.5A |
Rds On (Typ) |
20m Ω |
Turn Off Time |
230 μs |
Built-in Protections |
TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
Output Current Flow Direction |
SINK |
Length |
8.65mm |
Width |
3.9mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
14-SOIC (0.154, 3.90mm Width) Exposed Pad |
Number of Pins |
14 |
Operating Temperature |
-40°C~150°C TJ |
Packaging |
Tape & Reel (TR) |
Published |
2011 |
Series |
PROFET® |
JESD-609 Code |
e3 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
14 |
ECCN Code |
EAR99 |
Terminal Finish |
Tin (Sn) |
Max Power Dissipation |
1.8W |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
NOT SPECIFIED |
Number of Functions |
1 |
Supply Voltage |
13.5V |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Number of Outputs |
1 |
Output Type |
N-Channel |
Max Output Current |
6.5A |
Supply Voltage-Max (Vsup) |
28V |
Supply Voltage-Min (Vsup) |
5V |
Interface |
On/Off |
BTS50201EKAXUMA1 Overview
As you can see, it's packaged in the way of a Tape & Reel (TR).In the 14-SOIC (0.154, 3.90mm Width) Exposed Pad package, it is included.The mounting type of the LED driver is Surface Mount.The switch type of this switch is General Purpose.To ensure reliable operation, the temperature should be set to -40°C~150°C TJ.In this LED driver, there are no outputs available.To operate, it needs a supply voltage of Not Required.There is a maximum output voltage of N-Channel volts on this LED driver.A total of 14 terminations have been recorded.During operation, the 14 pins are used.As far as functions are concerned, the lighting driver has 1.The maximum output current must drop to 6.5A to meet the operation criteria.The supply voltage can be 13.5V for high efficiency.The LED driving board is mounted in the way of Surface Mount.A component of this type is included in the PROFET? series.A maximum supply voltage of 28V is set in Vsup.The supply voltage (Vsup) should be kept above 5V for normal operation.
BTS50201EKAXUMA1 Features
Supplied from 13.5V
BTS50201EKAXUMA1 Applications
There are a lot of Infineon Technologies BTS50201EKAXUMA1 Power Switches ICs applications.
- Hard Disk Drives
- USB Protection
- Hot-Swap Systems
- Various applications equipped with buttons
- Wearable Devices
- Portable Music Players
- PC Cards
- Smartphone and PDA
- USB3.1 Power Delivery
- Solid State Drivers