Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
14-SOIC (0.154, 3.90mm Width) Exposed Pad |
Number of Pins |
14 |
Operating Temperature |
-40°C~150°C TJ |
Packaging |
Tape & Reel (TR) |
Published |
2011 |
Series |
PROFET® |
JESD-609 Code |
e3 |
Feature |
Auto Restart |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
14 |
ECCN Code |
EAR99 |
Terminal Finish |
Tin (Sn) |
Max Power Dissipation |
2.2W |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Number of Functions |
1 |
Base Part Number |
BTS5020 |
Number of Outputs |
2 |
Output Type |
N-Channel |
Supply Voltage-Max (Vsup) |
5V |
Supply Voltage-Min (Vsup) |
3.3V |
Interface |
On/Off |
Current - Output (Max) |
5A |
Nominal Supply Current |
5mA |
Output Configuration |
High Side |
Power Dissipation |
2.2W |
Output Current |
7A |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Input Type |
Non-Inverting |
Switch Type |
General Purpose |
Halogen Free |
Halogen Free |
Nominal Input Voltage |
28V |
Ratio - Input:Output |
1:1 |
Voltage - Load |
8V~18V |
Fault Protection |
Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
Rds On (Typ) |
40m Ω |
Built-in Protections |
OVER CURRENT; OVER VOLTAGE; UNDER VOLTAGE |
Height Seated (Max) |
1.7mm |
Length |
8.65mm |
Width |
3.9mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
BTS50202EKAXUMA2 Overview
The LED driver's packaged as a Tape & Reel (TR).Package 14-SOIC (0.154, 3.90mm Width) Exposed Pad contains it.A Surface Mount mounting is used for the LED driving board.The switch type of this switch is General Purpose.In order to guarantee reliable performance, the temperature should be set to -40°C~150°C TJ.It is possible to use 2 outputs in the lighting driver.The LED driving board operates with a supply voltage of Not Required.It has a maximum output voltage of N-Channel volts.This LED driving board is equipped with Auto Restart features in order for it to be useful.I believe it belongs to the BTS5020 family.As a result, there are 14 terminations.In order to operate, 14 pins are used.As far as functions are concerned, the lighting driver has 1.The LED driver output is limited to 5AV.The lighting driver is mounted in the direction of Surface Mount.It is included in the PROFET? series.When this is the case, the output current is set to 7A.The maximum supply voltage for this lighting driver is set to 5V (Vsup).The supply voltage (Vsup) should be kept above 3.3V for normal operation.
BTS50202EKAXUMA2 Features
BTS50202EKAXUMA2 Applications
There are a lot of Infineon Technologies BTS50202EKAXUMA2 Power Switches ICs applications.
- Portable Music Players
- Storage (HDDs, SSDs)
- Various applications equipped with buttons
- Hot Swap
- Gaming
- Storage Drives
- PDAs
- Set-top-box
- Telecom and Network Systems
- Low Voltage I/O System Power