BTS5030-2EKA
| Parameters | |
|---|---|
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 13.5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Max Output Current | 47A |
| Operating Supply Voltage | 18V |
| Number of Channels | 2 |
| Max Supply Voltage | 28V |
| Min Supply Voltage | 5V |
| Power Dissipation-Max | 2.1W |
| Nominal Supply Current | 5mA |
| Max Supply Current | 6mA |
| Turn On Delay Time | 230 μs |
| Min Input Voltage | 8V |
| Max Input Voltage | 18V |
| Halogen Free | Halogen Free |
| Output Current per Channel | 4A |
| Nominal Input Voltage | 13.5V |
| Turn-Off Delay Time | 230 μs |
| Interface IC Type | BUFFER OR INVERTER BASED PERIPHERAL DRIVER |
| Driver Number of Bits | 2 |
| Screening Level | AEC-Q100 |
| Output Peak Current Limit-Nom | 4A |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 1.7mm |
| Length | 8.65mm |
| Width | 3.9mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Surface Mount | YES |
| Number of Pins | 14 |
| Packaging | Tape and Reel |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Resistance | 55mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 150°C |
| Min Operating Temperature | -40°C |
BTS5030-2EKA Overview
Hot-swappable device is currently possible to access 2 channels.It's packaged in a Tape and Reel shape.The 14 terminations total to three.There is a DUAL terminal position on the device.The device has a total of 14 pins.High efficiency can be achieved by using 13.5V as supply voltage.During operation, 14 pins are used.This gadget is self-contained in?Peripheral Drivers.For stable operation, 150°C°C is the maximum operating temperature.At a minimum working temperature of -40°C degrees Celsius, it maintains reliability.An input voltage of 28VV is the maximum it can handle.Low supply voltages, such as 5VV, are possible.To meet the operation criteria, the maximum output current drops to 47A.In order for it to operate, a current of 6mA is required.There is 55mOhm resistance in the device.
BTS5030-2EKA Features
The terminal position of 14
BTS5030-2EKA Applications
There are a lot of Infineon Technologies BTS5030-2EKA hot swap controllers applications.
- Industrial
- Remote access server
- ISDN system
- Overvoltage protection
- Hard drive
- Industrial high-side switches
- CompactPCI
- Comprehensive analog and digital capabilities
- Automotive circuits
- Disconnect faulty loads before supply voltage drops
