BTS50302EKAXUMA1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| Series | PROFET® |
| JESD-609 Code | e3 |
| Feature | Auto Restart |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 13.5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | BTS5030 |
| Pin Count | 14 |
| JESD-30 Code | R-PDSO-G14 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Supply Voltage-Min (Vsup) | 5V |
| Interface | On/Off |
| Current - Output (Max) | 4A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5V~28V |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Screening Level | AEC-Q100 |
| Output Peak Current Limit-Nom | 4A |
| Rds On (Typ) | 30m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 1.7mm |
| Length | 8.65mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
BTS50302EKAXUMA1 Overview
A Tape & Reel (TR) is used to package it.There is a package for it in the 14-SOIC (0.154, 3.90mm Width) Exposed Pad package.Mounting type Surface Mount is selected for the LED driving board.The switch type of this switch is General Purpose.To ensure reliable operation, the temperature should be set to -40°C~150°C TJ.The lighting driver is equipped with 2 outputs that can be used.The LED driving board operates at Not Required volts.Voltage output is N-Channel volts at maximum.A lighting driver with Auto Restart features is available.The BTS5030 family contains this object.There are 14 terminations in it.As far as functions are concerned, the lighting driver has 1.4AV is the maximum output of the LED driver.It is possible to achieve a high level of efficiency with a supply voltage of 13.5V.As a result, it has a total of 14 pins.These electrical components are part of the PROFET? series.In order for the lighting driver to operate normally, the supply voltage (Vsup) should be maintained above 5V.
BTS50302EKAXUMA1 Features
Supplied from 13.5V
BTS50302EKAXUMA1 Applications
There are a lot of Infineon Technologies BTS50302EKAXUMA1 Power Switches ICs applications.
- Wearable Devices
- Mobile Communication Devices
- Notebook and Tablet Computers
- Set-top-box
- Smart Phones, Feature Phones
- Portable Video Game Players
- Wireless/Networking Cards
- HDD, SSD
- USB Power Distribution
- Telecom and Network Systems
