BTS50451EJAXUMA1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Series | PROFET® |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 13.5V |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 4A |
| Supply Voltage-Min (Vsup) | 8V |
| Interface | On/Off |
| Nominal Supply Current | 3.5mA |
| Output Configuration | High Side |
| Power Dissipation | 1.6W |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Switch Type | General Purpose |
| Halogen Free | Halogen Free |
| Nominal Input Voltage | 13.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 8V~18V |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage, UVLO |
| Output Peak Current Limit-Nom | 4A |
| Rds On (Typ) | 45m Ω |
| Turn Off Time | 230 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BTS50451EJAXUMA1 Overview
It's?packaged?in?the way?of?a?Tape & Reel (TR).In the 8-SOIC (0.154, 3.90mm Width) Exposed Pad package, it is included.In this case, the LED driving board is mounted as Surface Mount.There is a switch type of General Purpose.To ensure reliable performance, the temperature should be set to -40°C~150°C TJ.The LED driver is equipped with 1 outputs.Operation is based on a supply voltage of Not Required.The maximum output voltage is N-Channel volts.As a result, there are 8 terminations.For operation, we use the 8 pins.There are 1 functions of the LED driver.The maximum output current is reduced to 4A to meet the operation criteria.It is possible to obtain high efficiency with a supply voltage of 13.5V.As a result, it is mounted in the manner of Surface Mount.This electrical component is included in the PROFET? series.To maintain a normal operation, the supply voltage (Vsup) must be maintained above 8V.
BTS50451EJAXUMA1 Features
Supplied from 13.5V
BTS50451EJAXUMA1 Applications
There are a lot of Infineon Technologies BTS50451EJAXUMA1 Power Switches ICs applications.
- Notebook and Tablet Computers
- Gaming
- Storage (HDDs, SSDs)
- Smart Phones, Feature Phones
- Mobile Communication Devices
- Storage Drives
- Hot Swap
- Smartphone and PDA
- PC Card Hot Swap
- PDAs
