BTS50452EKAXUMA1
| Parameters | |
|---|---|
| JESD-30 Code | R-PDSO-G14 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 18V |
| Supply Voltage-Min (Vsup) | 8V |
| Interface | On/Off |
| Current - Output (Max) | 3A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 8V~18V |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 3A |
| Rds On (Typ) | 85m Ω |
| Supply Voltage1-Nom | 18V |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Supply Voltage1-Min | 5V |
| Height Seated (Max) | 1.7mm |
| Length | 8.65mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Series | PROFET® |
| JESD-609 Code | e3 |
| Feature | Auto Restart |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 13.5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | BTS5045 |
BTS50452EKAXUMA1 Overview
It's?packaged?in?the way?of?a?Tape & Reel (TR).It is included with the 14-SOIC (0.154, 3.90mm Width) Exposed Pad package as well.The lighting driver has the mounting type Surface Mount.There is a General Purpose switch type associated with it.Keeping the temperature at -40°C~150°C TJ ensures reliable operation.By default, it is set to output 2.A supply voltage of Not Required is required for it to operate.A maximum output voltage of N-Channel volts can be obtained with this LED driver.Currently, the LED driving board is equipped with Auto Restart features.As you can see, it comes from the BTS5045 family.It has a total of 14 terminations.It is important to note that the LED driving board has 1 functions.This lighting driver is capable of delivering a maximum output of 3A volts.As long as the supply voltage is 13.5V, high efficiency can be achieved.These electrical components are part of the PROFET? series.The maximum supply voltage for this lighting driver is set to 18V (Vsup).In order to operate normally, the supply voltage (Vsup) must remain above 8V.
BTS50452EKAXUMA1 Features
Supplied from 13.5V
BTS50452EKAXUMA1 Applications
There are a lot of Infineon Technologies BTS50452EKAXUMA1 Power Switches ICs applications.
- PC Card Hot Swap
- Hot-Swap Systems
- Portable Music Players
- Storage Drives
- Hot Swaps
- Portable Devices
- Smart Phones, Feature Phones
- Wireless/Networking Cards
- Low Voltage I/O System Power
- Storage (HDDs, SSDs)
