BTS50901EJAXUMA1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Cut Tape (CT) |
| Published | 2013 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 13.5V |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 3A |
| Supply Voltage-Min (Vsup) | 5V |
| Interface | On/Off |
| Nominal Supply Current | 3.5mA |
| Output Configuration | High Side |
| Power Dissipation | 1.5W |
| Output Current | 3A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Switch Type | General Purpose |
| Halogen Free | Halogen Free |
| Nominal Input Voltage | 28V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5V~28V |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 3A |
| Rds On (Typ) | 90m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BTS50901EJAXUMA1 Overview
As you can see, it's packaged in the way of a Cut Tape (CT).This package is included in 8-SOIC (0.154, 3.90mm Width) Exposed Pad.A Surface Mount mounting is used for the LED driving board.This switch is of type General Purpose.It is recommended that the temperature be set to -40°C~150°C TJ for reliable operation.As a default, the output is set to 1.With a supply voltage of Not Required, the LED driving board operates.The maximum output voltage of this LED driver is N-Channel volts.It contains 8 terminations.The operation is performed through the 8 pins.It consists of 1 functions.This results in the maximum output current dropping to 3A to meet the operation criteria.The supply voltage of 13.5V is conducive to high efficiency.Surface Mount is mounted in the way.When this case is used, the output current is set to 3A.For normal operation, the supply voltage (Vsup) must be kept above 5V.
BTS50901EJAXUMA1 Features
Supplied from 13.5V
BTS50901EJAXUMA1 Applications
There are a lot of Infineon Technologies BTS50901EJAXUMA1 Power Switches ICs applications.
- Gaming
- HDD, SSD
- Mobile Communication Devices
- Storage (HDDs, SSDs)
- PC Cards
- Set-top-box
- Solid-State Drives
- Hot Swap
- Portable/Handheld Devices
- USB3.1 Power Delivery
