BTS50902EKAXUMA1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) Exposed Pad |
| Number of Pins | 14 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Series | PROFET® |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Max Power Dissipation | 1.9W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 13.5V |
| Base Part Number | BTS5090 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Max Output Current | 2.5A |
| Supply Voltage-Max (Vsup) | 18V |
| Supply Voltage-Min (Vsup) | 8V |
| Interface | On/Off |
| Nominal Supply Current | 5mA |
| Output Configuration | High Side |
| Power Dissipation | 1.9W |
| Output Current | 3.5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Halogen Free | Halogen Free |
| Nominal Input Voltage | 13.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5V~28V |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Screening Level | AEC-Q100 |
| Turn On Time | 100 μs |
| Output Peak Current Limit-Nom | 2.5A |
| Rds On (Typ) | 90m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Height Seated (Max) | 1.7mm |
| Length | 8.65mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BTS50902EKAXUMA1 Overview
As you can see, it's packaged in the way of a Tape & Reel (TR).It is included in the package 14-SOIC (0.154, 3.90mm Width) Exposed Pad.A Surface Mount mounting is used for the LED driving board.General Purpose is the type of switch owned by it.It is best to set the temperature to -40°C~150°C TJ to ensure reliable operation.The LED driver has 2 outputs.With a supply voltage of Not Required, the LED driving board operates.The maximum output voltage of this LED driver is N-Channel volts.The BTS5090 family consists of this type.In total, there are 14 terminations.For operation, we use the 14 pins.The LED driver has 1 functions.The maximum output current drops to 2.5A in order to meet the operation criteria.Supply voltages of 13.5V allow for high efficiency.It is positioned in the direction of Surface Mount.The PROFET? series includes this electrical component.The output current is set to 3.5A in this case.In this LED driver, the maximum supply voltage is configured to be 18V (Vsup).Normal operation requires Vsup above 8V.
BTS50902EKAXUMA1 Features
Supplied from 13.5V
BTS50902EKAXUMA1 Applications
There are a lot of Infineon Technologies BTS50902EKAXUMA1 Power Switches ICs applications.
- Hard Disk Drives
- Notebook and Tablet Computers
- Smartphone and PDA
- Wireless Headsets
- PC Card Hot Swap
- Set-Top Boxes
- USB Ports/Hubs
- Portable/Handheld Devices
- Notebook PC
- Portable GPS Device
