BTS51802EKAXUMA1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Series | PROFET® |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 13.5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | BTS5180 |
| JESD-30 Code | R-PDSO-G14 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 18V |
| Supply Voltage-Min (Vsup) | 8V |
| Interface | On/Off |
| Current - Output (Max) | 1.5A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 8V~18V |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Screening Level | AEC-Q100 |
| Turn On Time | 100 µs |
| Output Peak Current Limit-Nom | 1.5A |
| Rds On (Typ) | 330m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 1.7mm |
| Length | 8.65mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
BTS51802EKAXUMA1 Overview
It is packaged in the manner of a Tape & Reel (TR).This package is included in 14-SOIC (0.154, 3.90mm Width) Exposed Pad.The lighting driver is mounted in the Surface Mount position.The switch type is General Purpose.Keeping the temperature at -40°C~150°C TJ ensures reliable operation.The lighting driver has a total of 2 outputs that are available for use.To operate, it needs a supply voltage of Not Required.The maximum output voltage is N-Channel volts.The BTS5180 family contains this object.In total, there are 14 terminations.As far as the lighting driver is concerned, there are 1 functions.1.5AV is the maximum output of the LED driver.The supply voltage can be 13.5V for high efficiency.A component of this type is included in the PROFET? series.In this LED driver, the maximum supply voltage is configured to be 18V (Vsup).In order to operate normally, the supply voltage (Vsup) must be maintained above 8V.
BTS51802EKAXUMA1 Features
Supplied from 13.5V
BTS51802EKAXUMA1 Applications
There are a lot of Infineon Technologies BTS51802EKAXUMA1 Power Switches ICs applications.
- USB3.1 Power Delivery
- Wearable Devices
- USB Ports/Hubs
- Hot-Swap Systems
- Storage Drives
- USB Power Distribution
- Various applications equipped with buttons
- Telecom and Network Systems
- Wireless Modem Data Cards
- Solid-State Drives
