Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
14-SOIC (0.154, 3.90mm Width) Exposed Pad |
Operating Temperature |
-40°C~150°C TJ |
Packaging |
Tape & Reel (TR) |
Published |
2014 |
Series |
PROFET® |
JESD-609 Code |
e3 |
Part Status |
Not For New Designs |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
14 |
ECCN Code |
EAR99 |
Terminal Finish |
Tin (Sn) |
Additional Feature |
LOAD CURRENT IS 0.8A FOR ALL CHANNEL ACTIVE; EXT OPER VG IS 5 TO 28V |
Max Power Dissipation |
1.4W |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
NOT SPECIFIED |
Number of Functions |
1 |
Supply Voltage |
13.5V |
Terminal Pitch |
1.27mm |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Number of Outputs |
4 |
Output Type |
N-Channel |
Max Output Current |
800mA |
Supply Voltage-Max (Vsup) |
18V |
Supply Voltage-Min (Vsup) |
8V |
Interface |
Parallel |
Nominal Supply Current |
4mA |
Output Configuration |
High Side |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Input Type |
Non-Inverting |
Switch Type |
General Purpose |
Halogen Free |
Halogen Free |
Nominal Input Voltage |
13.5V |
Ratio - Input:Output |
1:1 |
Voltage - Load |
5V~28V |
Fault Protection |
Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
Screening Level |
AEC-Q100 |
Turn On Time |
230 μs |
Output Peak Current Limit-Nom |
1A |
Rds On (Typ) |
200m Ω |
Turn Off Time |
230 μs |
Built-in Protections |
TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
Output Current Flow Direction |
SINK |
Height Seated (Max) |
1.7mm |
Length |
8.65mm |
Width |
3.9mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
BTS52004EKAXUMA1 Overview
It is packaged in the form of a Tape & Reel (TR).There is a 14-SOIC (0.154, 3.90mm Width) Exposed Pad package that includes it.The lighting driver has the mounting type Surface Mount.It owns the General Purpose switch type.It is recommended to set the temperature to -40°C~150°C TJ in order to ensure reliable operation.As a default, the output is set to 4.Operation is based on Not Required supply voltage.A maximum output voltage of N-Channel volts can be achieved by this LED driver.It contains 14 terminations.There are 1 functions of the LED driver.It is necessary to reduce the maximum output current to 800mA to meet the operation criteria.High efficiency is possible at 13.5V supply voltage.Surface Mount is mounted in the way.It is part of the PROFET? series.The maximum supply voltage for this lighting driver is set to 18V (Vsup).Normal operation requires Vsup above 8V.As a result of using this lighting driver, LOAD CURRENT IS 0.8A FOR ALL CHANNEL ACTIVE; EXT OPER VG IS 5 TO 28V can also be produced.
BTS52004EKAXUMA1 Features
Supplied from 13.5V
Additional features like LOAD CURRENT IS 0.8A FOR ALL CHANNEL ACTIVE; EXT OPER VG IS 5 TO 28V
BTS52004EKAXUMA1 Applications
There are a lot of Infineon Technologies BTS52004EKAXUMA1 Power Switches ICs applications.
- PC Cards
- Portable GPS
- Smartphone and PDA
- Low Voltage I/O System Power
- USB Protection
- Portable GPS Device
- Storage (HDDs, SSDs)
- Hard Disk Drives
- Telecom and Network Systems
- Hot Swap