BTS5231-2GS
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 14 |
| Packaging | Cut Tape |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 14 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Resistance | 140mOhm |
| Max Operating Temperature | 150°C |
| Min Operating Temperature | -40°C |
| Subcategory | Peripheral Drivers |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 13.5V |
| Pin Count | 14 |
| Max Output Current | 10A |
| Power Supplies | 9/16V |
| Number of Channels | 2 |
| Max Supply Voltage | 28V |
| Min Supply Voltage | 4.5V |
| Power Dissipation-Max | 900mW |
| Nominal Supply Current | 3.8mA |
| Power Dissipation | 900mW |
| Max Supply Current | 4mA |
| Current - Output | 1.8A |
| Turn On Delay Time | 250 μs |
| Max Input Voltage | 28V |
| Output Current per Channel | 1.8A |
| Nominal Input Voltage | 28V |
| Turn-Off Delay Time | 250 μs |
| Interface IC Type | HALF BRIDGE BASED PERIPHERAL DRIVER |
| Driver Number of Bits | 2 |
| Screening Level | AEC-Q100 |
| Load Current | 3.5A |
| Output Peak Current Limit-Nom | 16A |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 1.75mm |
| Length | 8.75mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
BTS5231-2GS Overview
You can find it in the SOIC package.At the moment, there are 2 channels available.A Cut Tape-shaped package holds it.The 14 terminations total to three.In this case, the device is located at terminal DUAL.14 pins make up its total.A supply voltage of 13.5V can result in high efficiency.For operation, 14 pins are used.There is nothing else in Peripheral Drivers but this gadget.In Surface Mount direction, it is positioned.In order to ensure stable operation, a maximum operating temperature of 150°C°C must be set.Hot-swappable device works at a minimum temperature of -40°C degrees Celsius to maintain reliabilHot-swappable devicey.Hot-swappable device is important to note that the part has a power supply 9/16V.Hot Swap is capable of handling a maximum supply voltage of 28VV.As low a supply voltage as possible, such as 4.5VV, is possible.When operating criteria are met, the maximum output current is reduced to 10A.Hot Swap requires a maximum current of 4mA to operate.Despite its 140mOhm resistance, the device is not easily damaged.
BTS5231-2GS Features
The terminal position of 14
BTS5231-2GS Applications
There are a lot of Infineon Technologies BTS5231-2GS hot swap controllers applications.
- Telecommunications
- Continuous monitoring of device temperature
- Industrial computers and servers
- Industrial application
- Industrial
- Other forms of communications infrastructure
- Circuit breakers for electronic circuits
- Current monitoring
- Network switch
- Microcontrollers
