BTS52312GSXUMA1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| Series | PROFET® |
| Feature | Auto Restart, Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Max Power Dissipation | 900mW |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 13.5V |
| Base Part Number | BTS5231 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Max Output Current | 1.8A |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | On/Off |
| Nominal Supply Current | 3.8mA |
| Output Configuration | High Side |
| Power Dissipation | 900mW |
| Output Current | 1.8A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~28V |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 16A |
| Rds On (Typ) | 140m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Height Seated (Max) | 1.75mm |
| Length | 8.75mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
BTS52312GSXUMA1 Overview
It's?packaged?in?the way?of?a?Tape & Reel (TR).It's included in the 14-SOIC (0.154, 3.90mm Width) package.The LED driver is mounted as Surface Mount.General Purpose is the type of switch owned by it.It is recommended that the temperature be set to -40°C~150°C TJ for reliable performance.It is possible to use 2 outputs in the lighting driver.The LED driving board is powered by a voltage of Not Required.A maximum voltage of N-Channel volts is available from the output of this LED driver.Currently, the LED driving board is equipped with Auto Restart, Status Flag features.It belongs to the BTS5231 family.It contains 14 terminations.14 pins are used for operation.The LED driver has 1 functions.This operation requires the maximum output current to be decreased to 1.8A.High efficiency is possible when the supply voltage is set to 13.5V.Surface Mount is mounted in the way of this LED driving board.A component of this type is included in the PROFET? series.When this is the case, the output current is set to 1.8A.For normal operation, the supply voltage (Vsup) must be kept above 4.5V.
BTS52312GSXUMA1 Features
Supplied from 13.5V
BTS52312GSXUMA1 Applications
There are a lot of Infineon Technologies BTS52312GSXUMA1 Power Switches ICs applications.
- Storage (HDDs, SSDs)
- Solid State Drivers
- PDAs
- PC Cards
- USB Protection
- Wireless/Networking Cards
- Gaming
- Various applications equipped with buttons
- Portable GPS Device
- Portable Devices
