BTS5235-2G
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 20 |
| Packaging | Tape and Reel |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 20 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Resistance | 45mOhm |
| Max Operating Temperature | 150°C |
| Min Operating Temperature | -40°C |
| Subcategory | Peripheral Drivers |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 2 |
| Supply Voltage | 13.5V |
| Pin Count | 20 |
| Max Output Current | 28A |
| Power Supplies | 9/16V |
| Number of Channels | 2 |
| Max Supply Voltage | 28V |
| Min Supply Voltage | 4.5V |
| Power Dissipation-Max | 1.4W |
| Nominal Supply Current | 3.6mA |
| Max Supply Current | 4mA |
| Current - Output | 3.5A |
| Turn On Delay Time | 250 μs |
| Max Input Voltage | 28V |
| Output Current per Channel | 3.3A |
| Turn-Off Delay Time | 250 μs |
| Interface IC Type | HALF BRIDGE BASED PERIPHERAL DRIVER |
| Driver Number of Bits | 2 |
| Screening Level | AEC-Q100 |
| Output Peak Current Limit-Nom | 23A |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Width | 7.6mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
BTS5235-2G Overview
As part of the SOIC package, it is included.At the moment, 2 channels are accessible.It's packaged in a Tape and Reel shape.There are a total of 20 terminations on it.Device DUAL is in the terminal position.The device has a total of 20 pins.An efficient supply voltage is possible with 13.5V.This device uses 20 pins for operation.Peripheral Drivers contains this gadget all by itself.Surface Mount is its direction of movement.Hot-swappable device is possible to maintain stable operation at a maximum temperature of 150°C°C.Hot-swappable device maintains Hot-swappable devices reliabilHot-swappable devicey at a minimum working temperature of -40°C degrees Celsius.The power supplies of the part is 9/16V.28VV is the maximum supply voltage it can handle.Low supply voltages, such as 4.5VV, are possible.Hot Swap is necessary to reduce the maximum output current to 28A in order to meet the operation crHot Swaperia.There is a maximum current requirement of 4mA for it to operate.Devices have 45mOhm resistance.
BTS5235-2G Features
The terminal position of 20
BTS5235-2G Applications
There are a lot of Infineon Technologies BTS5235-2G hot swap controllers applications.
- Automotive circuits
- ISDN system
- CompactPCI
- Backplane
- Network switches
- Power supply hotswap & inrush control
- Data communication systems
- Overcurrent protection
- Firewire
- Other forms of communications infrastructure
