BTS5235-2L
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 12 |
| JESD-609 Code | e3 |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 12 |
| ECCN Code | EAR99 |
| Resistance | 45mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 150°C |
| Min Operating Temperature | -40°C |
| Subcategory | Peripheral Drivers |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 13.5V |
| Terminal Pitch | 1mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 12 |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Max Output Current | 28A |
| Operating Supply Voltage | 28V |
| Power Supplies | 9/16V |
| Voltage | 28V |
| Power Dissipation-Max | 1.6W |
| Nominal Supply Current | 3.6mA |
| Current | 3.5A |
| Max Supply Current | 4mA |
| Current - Output | 3.5A |
| Turn On Delay Time | 250 μs |
| Output Current per Channel | 3.5A |
| Turn-Off Delay Time | 250 μs |
| Interface IC Type | HALF BRIDGE BASED PERIPHERAL DRIVER |
| Driver Number of Bits | 2 |
| Screening Level | AEC-Q100 |
| Output Peak Current Limit-Nom | 2.6A |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Height | 2.35mm |
| Length | 6.4mm |
| Width | 7.5mm |
| RoHS Status | RoHS Compliant |
BTS5235-2L Overview
There is a SOIC package that includes this.Hot-swappable device has a total of 12 terminations.A device's terminal position is DUAL.Total number of pins is 12.A supply voltage of 13.5V can result in high efficiency.In order to operate, 12 pins are used.Peripheral Drivers contains this gadget all by itself.Hot-swappable device is posHot-swappable deviceioned in the direction of Surface Mount.The maximum operating temperature of 150°C°C allows for stable operation.Hot-swappable device maintains Hot-swappable devices reliabilHot-swappable devicey at a minimum working temperature of -40°C degrees Celsius.Hot-swappable device is important to note that the part has a power supply 9/16V.By default, it is set to output 2.In order to meet the operation criteria, the maximum output current must be reduced to 28A.In order to operate it, 4mA is the maximum current needed.45mOhm resistance is present in the device.
BTS5235-2L Features
The terminal position of 12
BTS5235-2L Applications
There are a lot of Infineon Technologies BTS5235-2L hot swap controllers applications.
- Supply voltage monitoring
- Redundant Array of Disks (RAID)
- Disconnect faulty loads before supply voltage drops
- Safe board insertion and extraction
- Electric vehicle
- Overvoltage protection
- Circuit power protectors
- Redundant negative voltage supplies
- Continuous monitoring of device temperature
- Solid state circuit breakers
