BTS52352LAUMA1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 12-BSOP (0.295, 7.50mm Width) Exposed Pad |
| Number of Pins | 12 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Series | PROFET® |
| JESD-609 Code | e3 |
| Feature | Auto Restart, Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 12 |
| ECCN Code | EAR99 |
| Terminal Finish | MATTE TIN |
| Max Power Dissipation | 1.6W |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 13.5V |
| Terminal Pitch | 1mm |
| Base Part Number | BTS5235 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Max Output Current | 3.5A |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | On/Off |
| Nominal Supply Current | 3.6mA |
| Output Configuration | High Side |
| Power Dissipation | 1.6W |
| Output Current | 2.6A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~28V |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 2.6A |
| Rds On (Typ) | 45m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Length | 7.5mm |
| Width | 6.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
BTS52352LAUMA1 Overview
The package is in the form of a Tape & Reel (TR).In the 12-BSOP (0.295, 7.50mm Width) Exposed Pad package, it is included.Surface Mount is the mounting type of the LED driver.General Purpose is the switch type it owns.It is recommended that the temperature be set to -40°C~150°C TJ for reliable operation.It is possible to use 2 outputs in the lighting driver.It uses a supply voltage of Not Required to operate.Voltage output is N-Channel volts at maximum.Currently, the LED driving board is equipped with Auto Restart, Status Flag features.As you can see, it comes from the BTS5235 family.A total of 12 terminations have been found in it.In order to operate, the 12 pins are used.It contains 1 functions.It is necessary to reduce the maximum output current to 3.5A to meet the operation criteria.High efficiency is possible at 13.5V supply voltage.The lighting driver is mounted in the direction of Surface Mount.This electrical component is part of the PROFET? series.It is set to 2.6A in this case.For normal operation, the supply voltage (Vsup) must be kept above 4.5V.
BTS52352LAUMA1 Features
Supplied from 13.5V
BTS52352LAUMA1 Applications
There are a lot of Infineon Technologies BTS52352LAUMA1 Power Switches ICs applications.
- USB Power Distribution
- Hot Swap
- Storage Drives
- Smartphone and PDA
- Portable Devices
- PC Card Hot Swap
- Solid-State Drives
- Set-Top Boxes
- USB Ports/Hubs
- Wireless Headsets
