BTS52362GSXUMA1
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| Series | PROFET® |
| Feature | Auto Restart, Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 13.5V |
| Base Part Number | BTS5236 |
| JESD-30 Code | R-PDSO-G14 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | On/Off |
| Current - Output (Max) | 3.2A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~28V |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 23A |
| Rds On (Typ) | 40m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 1.75mm |
| Length | 8.75mm |
| Width | 4mm |
BTS52362GSXUMA1 Overview
The LED driver's packaged as a Tape & Reel (TR).There is a 14-SOIC (0.154, 3.90mm Width) package that includes it.In this case, the LED driving board is mounted as Surface Mount.The switch type of this switch is General Purpose.It is recommended that the temperature be set to -40°C~150°C TJ for reliable operation.The LED driver has 2 outputs.To operate, it needs a supply voltage of Not Required.It produces a maximum output voltage of N-Channel volts at its maximum output.Currently, the LED driving board is equipped with Auto Restart, Status Flag features.The BTS5236 family consists of this type.A total of 14 terminations can be found in it.There are 1 functions of the LED driver.This LED driver has a maximum output of 3.2AV.It is possible to achieve a high level of efficiency with a supply voltage of 13.5V.This electrical component is included in the PROFET? series.To maintain a normal operation, the supply voltage (Vsup) must be maintained above 4.5V.
BTS52362GSXUMA1 Features
Supplied from 13.5V
BTS52362GSXUMA1 Applications
There are a lot of Infineon Technologies BTS52362GSXUMA1 Power Switches ICs applications.
- Hard Disk Drives
- Portable Music Players
- Smartphone and PDA
- USB Protection
- Set-top-box
- Hot Swap
- Notebook and Tablet Computers
- Solid-State Drives
- Wireless Modem Data Cards
- Hot Swaps
