BTS5242-2L
| Parameters | |
|---|---|
| Package / Case | SOIC |
| Surface Mount | YES |
| Number of Pins | 12 |
| Packaging | Tape and Reel |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 12 |
| ECCN Code | EAR99 |
| Resistance | 19mOhm |
| Max Operating Temperature | 150°C |
| Min Operating Temperature | -40°C |
| Subcategory | Peripheral Drivers |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 13.5V |
| Terminal Pitch | 1mm |
| Pin Count | 12 |
| Max Output Current | 50A |
| Operating Supply Voltage | 28V |
| Power Supplies | 9/16V |
| Number of Channels | 2 |
| Voltage | 28V |
| Max Supply Voltage | 28V |
| Min Supply Voltage | 4.5V |
| Power Dissipation-Max | 1.4W |
| Nominal Supply Current | 3.2mA |
| Current | 6A |
| Power Dissipation | 1.4W |
| Max Supply Current | 4mA |
| Current - Output | 6A |
| Turn On Delay Time | 250 μs |
| Halogen Free | Halogen Free |
| Output Current per Channel | 6A |
| Nominal Input Voltage | 28V |
| Turn-Off Delay Time | 250 μs |
| Interface IC Type | HALF BRIDGE BASED PERIPHERAL DRIVER |
| Driver Number of Bits | 2 |
| Load Current | 6A |
| Output Peak Current Limit-Nom | 4.5A |
| Drain to Source Resistance | 25mOhm |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Height | 2.35mm |
| Length | 6.4mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
BTS5242-2L Overview
You get it with the SOIC package.Hot-swappable device is currently possible to access 2 channels.There is a Tape and Reel-shaped package for it.Total terminations are 12.A device's terminal position is DUAL.In total, there are 12 pins on it.High efficiency can be achieved when the supply voltage is 13.5V.A 12 pin is used for operation.The gadget in Peripheral Drivers is self-contained.Hot-swappable device is stable to operate at a temperature of 150°C°C at the maximum.Hot-swappable device operates at a minimum temperature of -40°C degrees Celsius in order to ensure reliabilHot-swappable devicey.The power supplies of the part is 9/16V.Hot Swap is capable of handling a maximum supply voltage of 28VV.Low supply voltages, such as 4.5VV, can be used.50A is the maximum output current required to meet the operation criteria.Its maximum current requirement is 4mA.The device has {0} resistance.
BTS5242-2L Features
The terminal position of 12
BTS5242-2L Applications
There are a lot of Infineon Technologies BTS5242-2L hot swap controllers applications.
- Base station
- DC boost circuit
- Network router
- Limitting the inrush current
- Hard drive
- Redundant negative voltage supplies
- Distributed power systems
- Redundant Array of Disks (RAID)
- Load transient protection
- Supply voltage monitoring
