banner_page

BTS52462LAUMA1

N-Channel 1mm PMIC PROFET? Series BTS5246 12 Pin 13.5V 12-BSOP (0.295, 7.50mm Width) Exposed Pad


  • Manufacturer: Infineon Technologies
  • Nocochips NO: 376-BTS52462LAUMA1
  • Package: 12-BSOP (0.295, 7.50mm Width) Exposed Pad
  • Datasheet: PDF
  • Stock: 291
  • Description: N-Channel 1mm PMIC PROFET? Series BTS5246 12 Pin 13.5V 12-BSOP (0.295, 7.50mm Width) Exposed Pad (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 12-BSOP (0.295, 7.50mm Width) Exposed Pad
Number of Pins 12
Operating Temperature -40°C~150°C TJ
Packaging Tape & Reel (TR)
Published 2008
Series PROFET®
Feature Auto Restart, Status Flag
Part Status Obsolete
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 12
ECCN Code EAR99
Max Power Dissipation 1.4W
Technology MOS
Terminal Position DUAL
Terminal Form GULL WING
Number of Functions 2
Supply Voltage 13.5V
Terminal Pitch 1mm
Base Part Number BTS5246
Number of Outputs 2
Output Type N-Channel
Max Output Current 6A
Supply Voltage-Min (Vsup) 4.5V
Interface On/Off
Nominal Supply Current 3.2mA
Output Configuration High Side
Power Dissipation 1.4W
Output Current 6A
Voltage - Supply (Vcc/Vdd) Not Required
Input Type Non-Inverting
Switch Type General Purpose
Ratio - Input:Output 1:1
Voltage - Load 4.5V~28V
Fault Protection Current Limiting (Adjustable), Open Load Detect, Over Temperature, Over Voltage
Output Peak Current Limit-Nom 4.5A
Rds On (Typ) 35m Ω
Built-in Protections TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE
Length 7.5mm
Width 6.4mm
Radiation Hardening No
RoHS Status RoHS Compliant

BTS52462LAUMA1 Overview


The LED driver's packaged as a Tape & Reel (TR).In the 12-BSOP (0.295, 7.50mm Width) Exposed Pad package, it is included.Surface Mount is the mounting type of the LED driver.There is a switch type of General Purpose.Ensure reliable operation by setting the temperature to -40°C~150°C TJ.In this LED driver, there are no outputs available.The LED driving board operates with a supply voltage of Not Required.A maximum output voltage of N-Channel volts can be obtained with this LED driver.It is equipped with Auto Restart, Status Flag features.There is a BTS5246 family of things that it belongs to.It contains 12 terminations.During operation, the 12 pins are used.As far as functions are concerned, the lighting driver has 2.It is necessary to reduce the maximum output current to 6A to meet the operation criteria.It is possible to achieve a high level of efficiency with a supply voltage of 13.5V.The lighting driver is mounted in the direction of Surface Mount.The PROFET? series includes this electrical component.In this case, the output current is set to 6A.In order to operate normally, the supply voltage (Vsup) must remain above 4.5V.

BTS52462LAUMA1 Features


Supplied from 13.5V

BTS52462LAUMA1 Applications


There are a lot of Infineon Technologies BTS52462LAUMA1 Power Switches ICs applications.

  • Hot-Swap Systems
  • Smartphone and PDA
  • Portable/Handheld Devices
  • Notebook and Tablet Computers
  • Solid-State Drives
  • PDAs
  • Set-top-box
  • Smart Phones, Feature Phones
  • Wireless Modem Data Cards
  • PC Cards

Write a review

Note: HTML is not translated!
    Bad           Good