BTS54040LBAAUMA1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-PowerVDFN |
| Number of Pins | 24 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| Series | Automotive, AEC-Q100 |
| Feature | Slew Rate Controlled |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| Additional Feature | SEATED HGT-NOM |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 4.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Number of Outputs | 4 |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 3.8V |
| Interface | SPI |
| Nominal Supply Current | 125μA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | 3.8V~5.5V |
| Switch Type | General Purpose |
| Halogen Free | Halogen Free |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~28V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage, UVLO |
| Rds On (Typ) | 39m Ω |
| Supply Voltage1-Nom | 13.5V |
| Supply Voltage1-Min | 5.5V |
| Supply Voltage1-Max | 28V |
| Height Seated (Max) | 1mm |
| Length | 9.5mm |
| Width | 6mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
BTS54040LBAAUMA1 Overview
As a result, it is packaged in the form of a Tape & Reel (TR).This file is included in package 24-PowerVDFN.Mounting type Surface Mount is selected for the LED driving board.A General Purpose switch type is owned by it.It is recommended that the temperature be set to -40°C~150°C TJ for reliable performance.The LED driver has 4 outputs.A supply voltage of 3.8V~5.5V is required for it to operate.There is a maximum output voltage of N-Channel volts.In terms of features, the LED driving board has Slew Rate Controlled.As a result, there are 24 terminations.For operation, 24 pins are used.The LED driving board has a total of 1 functions.The supply voltage of 4.3V is conducive to high efficiency.It is mounted in the way of Surface Mount.These electrical components are part of the Automotive, AEC-Q100 series.The LED driver is configured with a maximum supply voltage of 5.5V (Vsup).Normal operation requires a voltage above 3.8V for the supply voltage.SEATED HGT-NOM can also be produced by using this LED driver.
BTS54040LBAAUMA1 Features
Supplied from 4.3V
Additional features like SEATED HGT-NOM
BTS54040LBAAUMA1 Applications
There are a lot of Infineon Technologies BTS54040LBAAUMA1 Power Switches ICs applications.
- Gaming
- USB Protection
- PC Card Hot Swap
- Wireless Headsets
- Hot Swaps
- Portable Devices
- HDD and SSD
- Smartphone and PDA
- USB Ports/Hubs
- Various applications equipped with buttons
