BTS54040LBBAUMA1
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 24-PowerVDFN |
| Surface Mount | YES |
| Number of Pins | 24 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| Series | Automotive |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 4.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Number of Outputs | 4 |
| Output Type | N-Channel |
| Max Output Current | 2A |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 3.8V |
| Interface | SPI |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | 3.8V~5.5V |
| Switch Type | General Purpose |
| Halogen Free | Halogen Free |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~28V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Screening Level | AEC-Q100 |
| Rds On (Typ) | 39m Ω |
| Supply Voltage1-Nom | 13.5V |
| Supply Voltage1-Min | 5.5V |
| Supply Voltage1-Max | 28V |
| Height Seated (Max) | 1.05mm |
| Length | 9.5mm |
| Width | 6mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
BTS54040LBBAUMA1 Overview
As you can see, it's packaged in the way of a Tape & Reel (TR).In the 24-PowerVDFN package, it is included.It has been mounted as Surface Mount on the LED driver.The switch type of this switch is General Purpose.To ensure reliable operation, set the temperature to -40°C~150°C TJ.The LED driver has a total of 4 outputs.A supply voltage of 3.8V~5.5V is required for it to operate.There is a maximum output voltage of N-Channel volts.It has a total of 24 terminations.During operation, the 24 pins are used.As far as functions are concerned, the lighting driver has 1.As a result, the maximum output current is reduced to 2A in order to meet the operation requirements.The supply voltage can be 4.3V for high efficiency.It is part of the Automotive series.In this case, Vsup (maximum supply voltage) is set to 5.5V.The supply voltage (Vsup) should be kept above 3.8V for normal operation.
BTS54040LBBAUMA1 Features
Supplied from 4.3V
BTS54040LBBAUMA1 Applications
There are a lot of Infineon Technologies BTS54040LBBAUMA1 Power Switches ICs applications.
- Hot-Swap Systems
- Smartphone and PDA
- Portable GPS Device
- Storage (HDDs, SSDs)
- Solid-State Drives
- Portable Video Game Players
- Notebook and Tablet Computers
- Portable GPS
- Smart Phones, Feature Phones
- USB Power Distribution
