BTS54040LBEAUMA1
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-PowerVDFN |
| Number of Pins | 24 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| Series | Automotive |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| Additional Feature | SEATED HGT-NOM |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 4.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Number of Outputs | 4 |
| Output Type | N-Channel |
| Max Output Current | 2A |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 3.8V |
| Interface | SPI |
| Nominal Supply Current | 125μA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | 3.8V~5.5V |
| Switch Type | General Purpose |
| Halogen Free | Halogen Free |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 5.5V~28V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Screening Level | AEC-Q100 |
| Rds On (Typ) | 39m Ω |
| Supply Voltage1-Nom | 13.5V |
| Supply Voltage1-Min | 5.5V |
| Supply Voltage1-Max | 28V |
| Height Seated (Max) | 1mm |
| Length | 9.5mm |
| Width | 6mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
BTS54040LBEAUMA1 Overview
It is packaged in the manner of a Tape & Reel (TR).The 24-PowerVDFN package contains it.A Surface Mount mounting is used for the LED driving board.The switch type is General Purpose.To ensure reliable performance, the temperature should be set to -40°C~150°C TJ.The lighting driver has a total of 4 outputs that are available for use.The LED driving board operates at 3.8V~5.5V volts.The maximum output voltage of this LED driver is N-Channel volts.There are 24 terminations in it.It is necessary to use the 24 pins in order to operate the LED driver.It has 1 functions.The maximum output current drops to 2A in order to meet the operation criteria.With a supply voltage of 4.3V, high efficiency is possible.The lighting driver is mounted in the way of Surface Mount.This electrical component can be found in the Automotive series.In this LED driver, the maximum supply voltage is configured to be 5.5V (Vsup).To maintain a normal operation, the supply voltage (Vsup) must be maintained above 3.8V.As a result of using this lighting driver, SEATED HGT-NOM can also be produced.
BTS54040LBEAUMA1 Features
Supplied from 4.3V
Additional features like SEATED HGT-NOM
BTS54040LBEAUMA1 Applications
There are a lot of Infineon Technologies BTS54040LBEAUMA1 Power Switches ICs applications.
- Portable Video Game Players
- PC Cards
- Set-top-box
- Various applications equipped with buttons
- Hard Disk Drives
- HDD and SSD
- Hot Swap
- Portable Devices
- Handheld Devices
- Portable GPS Device
