BTS54040LBFAUMA1
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 24-PowerVDFN |
| Surface Mount | YES |
| Number of Pins | 24 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| Series | Automotive |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 4.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Number of Outputs | 4 |
| Output Type | N-Channel |
| Max Output Current | 2A |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 3.8V |
| Interface | SPI |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | 3.8V~5.5V |
| Switch Type | General Purpose |
| Halogen Free | Halogen Free |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 5.5V~28V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Screening Level | AEC-Q100 |
| Rds On (Typ) | 39m Ω |
| Supply Voltage1-Nom | 13.5V |
| Supply Voltage1-Min | 5.5V |
| Supply Voltage1-Max | 28V |
| Height Seated (Max) | 1.05mm |
| Length | 9.5mm |
| Width | 6mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
BTS54040LBFAUMA1 Overview
The LED driver's packaged as a Tape & Reel (TR).It is included with the 24-PowerVDFN package as well.The LED driver is mounted as Surface Mount.It owns the General Purpose switch type.It is recommended that the temperature be set to -40°C~150°C TJ for reliable operation.The lighting driver is equipped with 4 outputs that can be used.Operation is based on a supply voltage of 3.8V~5.5V.The maximum output voltage of this LED driver is N-Channel volts.A total of 24 terminations can be found in it.The operation is carried out using the 24 pins.It is important to note that the LED driving board has 1 functions.The maximum output current drops to 2A in order to meet the operation criteria.High efficiency is possible at 4.3V supply voltage.The Automotive series includes this electrical component.The maximum supply voltage is set to 5.5V.To maintain a normal operation, the supply voltage (Vsup) must be maintained above 3.8V.
BTS54040LBFAUMA1 Features
Supplied from 4.3V
BTS54040LBFAUMA1 Applications
There are a lot of Infineon Technologies BTS54040LBFAUMA1 Power Switches ICs applications.
- Set-Top Boxes
- Smartphone and PDA
- Hot Swap
- Storage Drives
- Various applications equipped with buttons
- USB Power Distribution
- USB Ports/Hubs
- PC Cards
- USB Protection
- Solid State Drivers
