BTS54220LBAAUMA1
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-PowerVDFN |
| Number of Pins | 24 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 1997 |
| Series | Automotive, AEC-Q100 |
| Feature | Slew Rate Controlled |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| Resistance | 55mOhm |
| Additional Feature | SEATED HGT-NOM |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 4.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Number of Outputs | 4 |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 3.8V |
| Interface | SPI |
| Nominal Supply Current | 125μA |
| Output Configuration | High Side |
| Output Current | 15mA |
| Voltage - Supply (Vcc/Vdd) | 3.8V~5.5V |
| Turn On Delay Time | 180 μs |
| Switch Type | General Purpose |
| Halogen Free | Halogen Free |
| Turn-Off Delay Time | 180 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~28V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage, UVLO |
| Rds On (Typ) | 9m Ω, 27m Ω |
| Supply Voltage1-Nom | 13.5V |
| Supply Voltage1-Min | 5.5V |
| Supply Voltage1-Max | 28V |
| Height Seated (Max) | 1mm |
| Length | 9.5mm |
| Width | 6mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
BTS54220LBAAUMA1 Overview
A Tape & Reel (TR) is used to package it.It is included with the 24-PowerVDFN package as well.This LED driving board is mounted using the mounting type Surface Mount.It owns the General Purpose switch type.It is recommended that the temperature be set to -40°C~150°C TJ for reliable performance.It is possible to use 4 outputs in the lighting driver.The LED driving board operates with a supply voltage of 3.8V~5.5V.Voltage output is N-Channel volts at maximum.In terms of features, the LED driving board has Slew Rate Controlled.As a result, there are 24 terminations.The 24 pins are used for the operation of the system.It consists of 1 functions.High efficiency is possible at 4.3V supply voltage.It is positioned in the direction of Surface Mount.The LED driver has 55mOhm resistance.This electrical component can be found in the Automotive, AEC-Q100 series.The output current is set to 15mA in this case.The maximum supply voltage is set to 5.5V.To maintain a normal operation, the supply voltage (Vsup) must be maintained above 3.8V.Through the use of this lighting driver, we can also produce SEATED HGT-NOM.
BTS54220LBAAUMA1 Features
Supplied from 4.3V
Resistance of 55mOhm
Additional features like SEATED HGT-NOM
BTS54220LBAAUMA1 Applications
There are a lot of Infineon Technologies BTS54220LBAAUMA1 Power Switches ICs applications.
- Set-Top Boxes
- Storage Drives
- Wearable Devices
- Set-top-box
- Low Voltage I/O System Power
- Mobile Communication Devices
- Notebook PC
- USB Power Distribution
- Various applications equipped with buttons
- Portable Video Game Players
