BTS54220LBBAUMA1
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 24-PowerVDFN |
| Surface Mount | YES |
| Number of Pins | 24 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| Series | Automotive |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 4.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Number of Outputs | 4 |
| Output Type | N-Channel |
| Max Output Current | 5A |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 3.8V |
| Interface | SPI |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | 3.8V~5.5V |
| Switch Type | General Purpose |
| Halogen Free | Halogen Free |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~28V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Screening Level | AEC-Q100 |
| Rds On (Typ) | 9m Ω |
| Supply Voltage1-Nom | 13.5V |
| Supply Voltage1-Min | 5.5V |
| Supply Voltage1-Max | 28V |
| Height Seated (Max) | 1.05mm |
| Length | 9.5mm |
| Width | 6mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
BTS54220LBBAUMA1 Overview
As a result, it is packaged in the form of a Tape & Reel (TR).It is included with the 24-PowerVDFN package as well.The LED driver is mounted as Surface Mount.There is a General Purpose switch type associated with it.To ensure reliable performance, the temperature should be set to -40°C~150°C TJ.By default, it is set to output 4.The LED driving board operates at 3.8V~5.5V volts.It produces a maximum output voltage of N-Channel volts at its maximum output.The termination count is 24.For operation, 24 pins are used.It consists of 1 functions.As a result, the maximum output current is reduced to 5A in order to meet the operation requirements.The supply voltage can be 4.3V for high efficiency.This electrical component can be found in the Automotive series.The maximum supply voltage for this LED driver is 5.5V (Vsup).Normal operation requires a voltage above 3.8V for the supply voltage.
BTS54220LBBAUMA1 Features
Supplied from 4.3V
BTS54220LBBAUMA1 Applications
There are a lot of Infineon Technologies BTS54220LBBAUMA1 Power Switches ICs applications.
- Solid State Drivers
- Telecom and Network Systems
- PDAs
- Portable/Handheld Devices
- Gaming
- PC Cards
- Mobile Communication Devices
- Portable Devices
- Various applications equipped with buttons
- Handheld Devices
