BTS54220LBEAUMA1
| Parameters | |
|---|---|
| Length | 9.5mm |
| Width | 6mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-PowerVDFN |
| Number of Pins | 24 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Series | Automotive |
| JESD-609 Code | e3 |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | SEATED HGT-NOM |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 4.3V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Number of Outputs | 4 |
| Output Type | N-Channel |
| Max Output Current | 5A |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 3.8V |
| Interface | SPI |
| Nominal Supply Current | 125μA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | 3.8V~5.5V |
| Switch Type | General Purpose |
| Halogen Free | Halogen Free |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 5.5V~28V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Screening Level | AEC-Q100 |
| Rds On (Typ) | 9m Ω |
| Supply Voltage1-Nom | 13.5V |
| Supply Voltage1-Min | 5.5V |
| Supply Voltage1-Max | 28V |
| Height Seated (Max) | 1mm |
BTS54220LBEAUMA1 Overview
As you can see, it's packaged in the way of a Tape & Reel (TR).This file is included in package 24-PowerVDFN.This LED driving board is mounted using the mounting type Surface Mount.It owns General Purpose switch type.To ensure reliable performance, the temperature should be set to -40°C~150°C TJ.The lighting driver has a total of 4 outputs that are available for use.The LED driving board is powered by a voltage of 3.8V~5.5V.A maximum voltage of N-Channel volts is available from the output of this LED driver.It consists of 24 terminations in total.For operation, we use the 24 pins.It has 1 functions.The maximum output current is reduced to 5A to meet the operation criteria.The supply voltage can be 4.3V for high efficiency.Surface Mount is mounted in the way of this LED driving board.A component of this type is included in the Automotive series.Vsup (maximum supply voltage) is set to 5.5V.A normal operation requires that the supply voltage (Vsup) remain above 3.8V.The LED driver can also be used to produce SEATED HGT-NOM.
BTS54220LBEAUMA1 Features
Supplied from 4.3V
Additional features like SEATED HGT-NOM
BTS54220LBEAUMA1 Applications
There are a lot of Infineon Technologies BTS54220LBEAUMA1 Power Switches ICs applications.
- USB Ports/Hubs
- Hot Swaps
- Set-Top Boxes
- Portable Video Game Players
- PC Cards
- Mobile Communication Devices
- USB Power Distribution
- Notebook PC
- Solid-State Drives
- Portable Devices
