BTS5460SFXUMA1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 36-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 36 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | Reversave™ |
| Feature | Slew Rate Controlled |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 36 |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | BTS5460 |
| Number of Outputs | 4 |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 3V |
| Interface | SPI |
| Nominal Supply Current | 10mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | 3V~5.5V |
| Switch Type | General Purpose |
| Ratio - Input:Output | 3:4 |
| Voltage - Load | 8V~17V |
| Boundary Scan | NO |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Rds On (Typ) | 3.5m Ω, 11m Ω |
| Height Seated (Max) | 2.65mm |
| Length | 12.8mm |
| Width | 7.6mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
BTS5460SFXUMA1 Overview
Tape & Reel (TR) is how it's packaged.In the 36-BSSOP (0.295, 7.50mm Width) package, it is included.The LED driver is mounted as Surface Mount.The switch type of this switch is General Purpose.To ensure reliable operation, the temperature should be set to -40°C~150°C TJ.It is possible to use 4 outputs in the lighting driver.To operate, it needs a supply voltage of 3V~5.5V.Voltage output is N-Channel volts at maximum.In terms of features, the LED driving board has Slew Rate Controlled.It comes under the family of BTS5460.It contains 36 terminations.It is necessary to use the 36 pins in order to operate the LED driver.The supply voltage can be 5V for high efficiency.The LED driving board is mounted in the way of Surface Mount.A component of this type is included in the Reversave? series.The maximum supply voltage for this LED driver is 5.5V (Vsup).For normal operation, the supply voltage (Vsup) should be kept above 3V.
BTS5460SFXUMA1 Features
Supplied from 5V
BTS5460SFXUMA1 Applications
There are a lot of Infineon Technologies BTS5460SFXUMA1 Power Switches ICs applications.
- Portable/Handheld Devices
- Set-Top Boxes
- Smartphone and PDA
- USB Ports/Hubs
- Hot Swaps
- Wearable Devices
- Handheld Devices
- Storage Drives
- Mobile Communication Devices
- Gaming
