BTS5482SFXUMA2
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 36-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 36 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2001 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Feature | Slew Rate Controlled |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 36 |
| Terminal Finish | Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 4.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Number of Outputs | 4 |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 3V |
| Interface | SPI |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | 3V~5.5V |
| Switch Type | General Purpose |
| Halogen Free | Halogen Free |
| Ratio - Input:Output | 3:4 |
| Voltage - Load | 4.5V~28V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage, UVLO |
| Rds On (Typ) | 4m Ω, 15m Ω |
| Supply Voltage1-Nom | 13.5V |
| Supply Voltage1-Min | 8V |
| Supply Voltage1-Max | 17V |
| Height Seated (Max) | 2.65mm |
| Length | 12.8mm |
| Width | 7.6mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BTS5482SFXUMA2 Overview
The LED driver's packaged as a Tape & Reel (TR).It is included with the 36-BSSOP (0.295, 7.50mm Width) package as well.It has been mounted as Surface Mount on the LED driver.The switch type of this switch is General Purpose.It is recommended to set the temperature to -40°C~150°C TJ in order to ensure reliable operation.As a default, the output is set to 4.It uses a supply voltage of 3V~5.5V to operate.A maximum output voltage of N-Channel volts can be achieved by this LED driver.The lighting driver has Slew Rate Controlled features.As a result, there are 36 terminations.The 36 pins are used to operate the LED driver.The LED driving board has a total of 1 functions.Using a voltage of 4.3V allows for high efficiency.The LED driving board is mounted in the way of Surface Mount.The Automotive, AEC-Q100 series includes this electrical component.The maximum supply voltage for this lighting driver is set to 5.5V (Vsup).To maintain a normal operation, the supply voltage (Vsup) must be maintained above 3V.
BTS5482SFXUMA2 Features
Supplied from 4.3V
BTS5482SFXUMA2 Applications
There are a lot of Infineon Technologies BTS5482SFXUMA2 Power Switches ICs applications.
- Hot-Swap Systems
- USB Power Distribution
- Storage (HDDs, SSDs)
- Smart Phones, Feature Phones
- Wireless Headsets
- USB Power Distribution
- Portable Devices
- Storage Drives
- Low Voltage I/O System Power
- Portable Music Players
