Parameters | |
---|---|
Mounting Type | Through Hole |
Package / Case | TO-218-5 |
Surface Mount | NO |
Number of Pins | 5 |
Operating Temperature | -40°C~150°C TJ |
Packaging | Tube |
Published | 2004 |
Series | PROFET® |
Part Status | Obsolete |
Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
Number of Terminations | 5 |
Termination | Through Hole |
ECCN Code | EAR99 |
Resistance | 1.9mOhm |
Subcategory | Peripheral Drivers |
Max Power Dissipation | 360W |
Technology | MOS |
Terminal Position | ZIG-ZAG |
Peak Reflow Temperature (Cel) | NOT SPECIFIED |
Number of Functions | 1 |
Supply Voltage | 12V |
Reach Compliance Code | unknown |
Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
Base Part Number | BTS555 |
Pin Count | 3 |
Number of Outputs | 1 |
Qualification Status | Not Qualified |
Output Type | N-Channel |
Max Output Current | 128A |
Voltage | 34V |
Interface | On/Off |
Current | 165A |
Output Configuration | High Side |
Voltage - Supply (Vcc/Vdd) | Not Required |
Input Type | Non-Inverting |
Switch Type | General Purpose |
Halogen Free | Not Halogen Free |
Continuous Drain Current (ID) | 158A |
Ratio - Input:Output | 1:1 |
Voltage - Load | 5V~34V |
Driver Number of Bits | 1 |
Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
Dual Supply Voltage | 34V |
Turn On Time | 600 μs |
Output Peak Current Limit-Nom | 400A |
Rds On (Typ) | 1.9m Ω |
Turn Off Time | 200 μs |
Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
Height | 4.9mm |
Length | 15mm |
Width | 12.5mm |
REACH SVHC | No SVHC |
RoHS Status | Non-RoHS Compliant |
Lead Free | Contains Lead |
N channel vertical power FET with charge pump, current-controlled input, and diagnostic feedback with load
current sense, integrated into Smart SIPMOS chip on chip technology. Providing embedded protective functions.
Overload protection
Current limitation
Short circuit protection
Overtemperature protection
Overvoltage protection (including load dump)
The clamp of negative voltage at the output
Fast de-energizing of inductive loads 2)
Low ohmic inverse current operation
Diagnostic feedback with load current sense
Open load detection via current sense
Loss of Vbb protection3)
Electrostatic discharge (ESD) protection
Power switch with current sense diagnostic
feedback for 12V and 24V DC grounded loads
Most suitable for loads with high inrush current
like lamps and motors; all types of resistive and inductive loads
Replaces electromechanical relays, fuses, and discrete circuits