BTS56033LBAAUMA1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-PowerVDFN |
| Number of Pins | 24 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| Series | Automotive, AEC-Q100 |
| Feature | Slew Rate Controlled |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| HTS Code | 8542.39.00.01 |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 4.3V |
| Number of Outputs | 6 |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 3.8V |
| Interface | SPI |
| Nominal Supply Current | 125μA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | 3.8V~5.5V |
| Switch Type | General Purpose |
| Halogen Free | Halogen Free |
| Ratio - Input:Output | 2:3 |
| Voltage - Load | 5.5V~28V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage, UVLO |
| Rds On (Typ) | 39m Ω, 110m Ω |
| Supply Voltage1-Nom | 13.5V |
| Supply Voltage1-Min | 5.5V |
| Supply Voltage1-Max | 28V |
| Height Seated (Max) | 1mm |
| Length | 9.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
BTS56033LBAAUMA1 Overview
A Tape & Reel (TR) is used to package it.There is a 24-PowerVDFN package that includes it.In this case, the LED driving board is mounted as Surface Mount.It owns the General Purpose switch type.Ensure reliable operation by setting the temperature to -40°C~150°C TJ.The LED driver is equipped with 6 outputs.Operation is based on a supply voltage of 3.8V~5.5V.There is a maximum output voltage of N-Channel volts.Features of the lighting driver are Slew Rate Controlled.A total of 24 terminations can be found in it.During operation, the 24 pins are used.Currently, there are 1 functions associated with the lighting driver.A supply voltage of 4.3V leads to high efficiency.As a result, it is mounted in the manner of Surface Mount.This electrical component is part of the Automotive, AEC-Q100 series.The lighting driver is configured to have a maximum supply voltage of 5.5V (Vsup).For normal operation, the supply voltage (Vsup) must be kept above 3.8V.
BTS56033LBAAUMA1 Features
Supplied from 4.3V
BTS56033LBAAUMA1 Applications
There are a lot of Infineon Technologies BTS56033LBAAUMA1 Power Switches ICs applications.
- Handheld Devices
- Wireless/Networking Cards
- PDAs
- Hot-Swap Systems
- Storage (HDDs, SSDs)
- Hot Swaps
- Notebook and Tablet Computers
- USB3.1 Power Delivery
- Smart Phones, Feature Phones
- Portable Devices
