BTS611L1
| Parameters | |
|---|---|
| Interface | On/Off |
| Nominal Supply Current | 4mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5V~34V |
| Driver Number of Bits | 2 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Turn On Time | 400 μs |
| Output Peak Current Limit-Nom | 7.5A |
| Rds On (Typ) | 160m Ω |
| Turn Off Time | 400 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SOURCE |
| Length | 15.6mm |
| Width | 9.9mm |
| Thickness | 4.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-220-7 (Formed Leads) |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 1999 |
| Series | PROFET® |
| Feature | Auto Restart, Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 36W |
| Technology | MOS |
| Terminal Position | ZIG-ZAG |
| Number of Functions | 2 |
| Supply Voltage | 12V |
| Reach Compliance Code | unknown |
| Base Part Number | BTS611L1 |
| Pin Count | 3 |
| JESD-30 Code | R-PZFM-T7 |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 1.8A |
| Supply Voltage-Max (Vsup) | 34V |
| Supply Voltage-Min (Vsup) | 5V |
BTS611L1 Overview
It is packaged in the manner of a Tube.It is included in the package TO-220-7 (Formed Leads).The lighting driver is mounted in the Through Hole position.The switch type is General Purpose.It is recommended to set the temperature to -40°C~150°C TJ in order to ensure reliable operation.In this LED driver, there are no outputs available.The LED driving board operates at Not Required volts.There is a maximum output voltage of N-Channel volts.There are Auto Restart, Status Flag features available on the LED driving board.I believe it belongs to the BTS611L1 family.As a result, there are 7 terminations.The LED driving board has a total of 2 functions.The maximum output current is reduced to 1.8A to meet the operation criteria.A supply voltage of 12V leads to high efficiency.Through Hole is mounted in the way.A total of 3 pins are present on it.This electrical component can be found in the PROFET? series.The LED driver is self-contained in an econtainer with Peripheral Drivers capacity.The maximum supply voltage for this lighting driver is set to 34V (Vsup).To maintain a normal operation, the supply voltage (Vsup) must be maintained above 5V.
BTS611L1 Features
Supplied from 12V
BTS611L1 Applications
There are a lot of Infineon Technologies BTS611L1 Power Switches ICs applications.
- Mobile Communication Devices
- USB Power Distribution
- USB Protection
- Notebook and Tablet Computers
- Portable Video Game Players
- Hot Swap
- Storage Drives
- Handheld Devices
- USB Power Distribution
- Portable Devices
