BTS611L1 E3128A
| Parameters | |
|---|---|
| Package / Case | TO-263-8, D2Pak (7 Leads + Tab), TO-263CA |
| Surface Mount | YES |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2003 |
| Series | PROFET® |
| JESD-609 Code | e3 |
| Feature | Auto Restart, Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Additional Feature | SEATED HGT-NOM; LOAD CURR FOR PARALLEL CHA IS 4.4 A |
| Technology | MOS |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | BTS611L1 |
| JESD-30 Code | R-PSSO-G6 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 34V |
| Supply Voltage-Min (Vsup) | 5V |
| Interface | On/Off |
| Current - Output (Max) | 1.8A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5V~34V |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Screening Level | AEC-Q100 |
| Turn On Time | 400 μs |
| Output Peak Current Limit-Nom | 2.3A |
| Rds On (Typ) | 160m Ω |
| Turn Off Time | 400 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 4.5mm |
| Length | 10mm |
| RoHS Status | Non-RoHS Compliant |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
BTS611L1 E3128A Overview
It's?packaged?in?the way?of?a?Tape & Reel (TR).This package is included in TO-263-8, D2Pak (7 Leads + Tab), TO-263CA.It has been mounted as Surface Mount on the LED driver.It owns General Purpose switch type.Ensure reliable operation by setting the temperature to -40°C~150°C TJ.As a default, the output is set to 2.To operate, it needs a supply voltage of Not Required.It has a maximum output voltage of N-Channel volts.Auto Restart, Status Flag features are available on the lighting driver.It is a member of the BTS611L1 family.As a result, there are 6 terminations.Currently, the lighting driver has a total of 1 functions.The lighting driver's maximum output is 1.8AV.Supply voltages of 12V allow for high efficiency.This electrical component can be found in the PROFET? series.This LED driver is configured to have a maximum supply voltage of 34V (Vsup).For normal operation, the supply voltage (Vsup) must be kept above 5V.With this LED driver, SEATED HGT-NOM; LOAD CURR FOR PARALLEL CHA IS 4.4 A can also be produced.
BTS611L1 E3128A Features
Supplied from 12V
Additional features like SEATED HGT-NOM; LOAD CURR FOR PARALLEL CHA IS 4.4 A
BTS611L1 E3128A Applications
There are a lot of Infineon Technologies BTS611L1 E3128A Power Switches ICs applications.
- Portable Devices
- Portable Music Players
- Set-top-box
- Various applications equipped with buttons
- Wireless Modem Data Cards
- Handheld Devices
- Smart Phones, Feature Phones
- USB Protection
- PDAs
- Low Voltage I/O System Power
