BTS611L1E3128ABUMA1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-263-8, D2Pak (7 Leads + Tab), TO-263CA |
| Number of Pins | 7 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Series | PROFET® |
| JESD-609 Code | e3 |
| Feature | Auto Restart, Status Flag |
| Part Status | Last Time Buy |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Max Power Dissipation | 36W |
| Technology | MOS |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| JESD-30 Code | R-PSSO-G6 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 34V |
| Supply Voltage-Min (Vsup) | 5V |
| Interface | Parallel |
| Current - Output (Max) | 3.5A |
| Nominal Supply Current | 4mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Halogen Free | Not Halogen Free |
| Nominal Input Voltage | 43V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5V~34V |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage, UVLO |
| Screening Level | AEC-Q100 |
| Turn On Time | 400 μs |
| Output Peak Current Limit-Nom | 2.3A |
| Rds On (Typ) | 160m Ω |
| Turn Off Time | 400 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 4.5mm |
| Length | 10mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
BTS611L1E3128ABUMA1 Overview
It is packaged in the manner of a Tape & Reel (TR).It's included in the TO-263-8, D2Pak (7 Leads + Tab), TO-263CA package.This lighting drivere has a mounting type of Surface Mount.General Purpose is the switch type it owns.Keeping the temperature at -40°C~150°C TJ ensures reliable operation.The LED driver has 2 outputs.Operation is based on Not Required supply voltage.There is a maximum output voltage of N-Channel volts on this LED driver.It has a total of Auto Restart, Status Flag features.A total of 6 terminations have been recorded.It is necessary to use the 7 pins in order to operate the LED driver.There are 1 functions of the LED driver.In terms of output, the lighting driver can provide a maximum of 3.5A V.As long as the supply voltage is 12V, high efficiency can be achieved.In this case, it is mounted in the way of Surface Mount.These electrical components are part of the PROFET? series.The Vsup value (maximum supply voltage) is set to 34V.A normal operation requires that the supply voltage (Vsup) remain above 5V.
BTS611L1E3128ABUMA1 Features
Supplied from 12V
BTS611L1E3128ABUMA1 Applications
There are a lot of Infineon Technologies BTS611L1E3128ABUMA1 Power Switches ICs applications.
- Portable GPS Device
- Storage (HDDs, SSDs)
- Portable Music Players
- Hard Disk Drives
- Portable Devices
- PC Cards
- Hot Swaps
- PDAs
- PC Card Hot Swap
- Portable/Handheld Devices
