BTS611L1E3230
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-220-7 |
| Number of Pins | 7 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Bulk |
| Published | 2003 |
| Series | PROFET® |
| Feature | Auto Restart, Status Flag |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Subcategory | Peripheral Drivers |
| Technology | MOS |
| Terminal Position | SINGLE |
| Number of Functions | 2 |
| Supply Voltage | 12V |
| Reach Compliance Code | unknown |
| Base Part Number | BTS611L1 |
| Pin Count | 3 |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 1.8A |
| Supply Voltage-Max (Vsup) | 34V |
| Supply Voltage-Min (Vsup) | 5V |
| Interface | On/Off |
| Nominal Supply Current | 4mA |
| Output Configuration | High Side |
| Power Dissipation | 36W |
| Output Current | 1.8A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5V~34V |
| Driver Number of Bits | 2 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Turn On Time | 400 μs |
| Output Peak Current Limit-Nom | 7.5A |
| Rds On (Typ) | 160m Ω |
| Turn Off Time | 400 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BTS611L1E3230 Overview
Bulk is the way it's packaged.It is included in the package TO-220-7.A Through Hole mounting is used for the LED driving board.General Purpose is the type of switch owned by it.It is recommended to set the temperature to -40°C~150°C TJ in order to ensure reliable operation.There are 2 outputs available on this lighting driver.Operation is based on Not Required supply voltage.A maximum voltage of N-Channel volts is available from the output of this LED driver.Auto Restart, Status Flag features are available on the lighting driver.As you can see, it comes from the BTS611L1 family.The termination count is 7.During operation, the 7 pins are used.The LED driving board has a total of 2 functions.The maximum output current drops to 1.8A in order to meet the operation criteria.It is possible to achieve a high level of efficiency with a supply voltage of 12V.This lighting driver is mounted in the way of Through Hole.A total of 3 pins are present on it.It is part of the PROFET? series.In this case, the output current is set to 1.8A.This LED driver is self-contained in an econtainer with a capacity of Peripheral Drivers.This LED driver is configured to have a maximum supply voltage of 34V (Vsup).Normal operation requires a voltage above 5V for the supply voltage.
BTS611L1E3230 Features
Supplied from 12V
BTS611L1E3230 Applications
There are a lot of Infineon Technologies BTS611L1E3230 Power Switches ICs applications.
- Smart Phones, Feature Phones
- Storage Drives
- Wearable Devices
- PC Cards
- PC Card Hot Swap
- Wireless Modem Data Cards
- Hot-Swap Systems
- Smartphone and PDA
- Portable/Handheld Devices
- HDD, SSD
