BTS612N1E3128ABUMA1
| Parameters | |
|---|---|
| Length | 10mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | TO-263-8, D2Pak (7 Leads + Tab), TO-263CA |
| Surface Mount | YES |
| Number of Pins | 7 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2003 |
| Series | PROFET® |
| JESD-609 Code | e3 |
| Feature | Auto Restart, Status Flag |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Resistance | 160mOhm |
| Terminal Finish | Tin (Sn) |
| Max Power Dissipation | 36W |
| Technology | MOS |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| JESD-30 Code | R-PSSO-G6 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Max Output Current | 7.5A |
| Supply Voltage-Max (Vsup) | 34V |
| Supply Voltage-Min (Vsup) | 5V |
| Interface | Parallel |
| Current - Output (Max) | 3.5A |
| Nominal Supply Current | 600μA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Halogen Free | Not Halogen Free |
| Output Current per Channel | 2.3A |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5V~34V |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage, UVLO |
| Screening Level | AEC-Q100 |
| Turn On Time | 400 μs |
| Output Peak Current Limit-Nom | 4.4A |
| Rds On (Typ) | 160m Ω |
| Turn Off Time | 400 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 4.5mm |
BTS612N1E3128ABUMA1 Overview
Tape & Reel (TR) is the way it's packaged.Package TO-263-8, D2Pak (7 Leads + Tab), TO-263CA contains it.The lighting driver has the mounting type Surface Mount.General Purpose is the switch type it owns.It is recommended that the temperature be set to -40°C~150°C TJ for reliable performance.By default, it is set to output 2.With a supply voltage of Not Required, the LED driving board operates.The maximum output voltage of this LED driver is N-Channel volts.There are Auto Restart, Status Flag features available on the LED driving board.As a result, there are 6 terminations.In order to operate, the 7 pins are used.There are 1 functions of the LED driver.From the lighting driver, there is a maximum output of 3.5AV.This operation requires the maximum output current to be decreased to 7.5A.The supply voltage can be 12V for high efficiency.In this case, there is 160mOhm resistance in the LED driving board.A component of this type is included in the PROFET? series.The maximum supply voltage is set to 34V.In order to operate normally, the supply voltage (Vsup) must be maintained above 5V.
BTS612N1E3128ABUMA1 Features
Supplied from 12V
Resistance of 160mOhm
BTS612N1E3128ABUMA1 Applications
There are a lot of Infineon Technologies BTS612N1E3128ABUMA1 Power Switches ICs applications.
- Portable Video Game Players
- Wireless Headsets
- Portable GPS
- Set-Top Boxes
- PC Card Hot Swap
- PDAs
- Notebook and Tablet Computers
- USB Power Distribution
- USB Protection
- Handheld Devices
