BTS6143DAUMA1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | TO-252-5, DPak (4 Leads + Tab), TO-252AD |
| Surface Mount | YES |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 1998 |
| Series | PROFET® |
| JESD-609 Code | e3 |
| Feature | Auto Restart |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Technology | MOS |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | BTS6143 |
| Pin Count | 3 |
| JESD-30 Code | R-PSSO-G4 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 38V |
| Supply Voltage-Min (Vsup) | 5.5V |
| Interface | On/Off |
| Current - Output (Max) | 41A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~38V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Turn On Time | 500 µs |
| Output Peak Current Limit-Nom | 8A |
| Rds On (Typ) | 8m Ω |
| Turn Off Time | 500 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 2.5mm |
| Length | 6.5mm |
| Width | 6.22mm |
| RoHS Status | ROHS3 Compliant |
BTS6143DAUMA1 Overview
It is package in Tape & Reel (TR) case.This package is included in TO-252-5, DPak (4 Leads + Tab), TO-252AD.Mounting type Surface Mount is selected for the LED driving board.The switch type is General Purpose.The temperature should be set to -40°C~150°C TJ to ensure reliable functioning.There is a default setting of 1 for output.Operation is based on Not Required supply voltage.A maximum output voltage of N-Channel volts has been specified.In terms of features, the LED driving board has Auto Restart.The BTS6143 family contains this object.It has a total of 4 terminations.Currently, the lighting driver has a total of 1 functions.The lighting driver's maximum output is 41AV.The supply voltage of 12V is conducive to high efficiency.3 pins are equipped with it.The PROFET? series includes this electrical component.The LED driver is configured with a maximum supply voltage of 38V (Vsup).In order to operate normally, the supply voltage (Vsup) must remain above 5.5V.
BTS6143DAUMA1 Features
Supplied from 12V
BTS6143DAUMA1 Applications
There are a lot of Infineon Technologies BTS6143DAUMA1 Power Switches ICs applications.
- USB Power Distribution
- Notebook and Tablet Computers
- Storage (HDDs, SSDs)
- PC Cards
- USB Ports/Hubs
- Hot Swaps
- Mobile Communication Devices
- Portable/Handheld Devices
- Hot Swap
- Low Voltage I/O System Power
