BTS621L1
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-220-7 (Formed Leads) |
| Number of Pins | 7 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 1997 |
| Series | PROFET® |
| Feature | Auto Restart, Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Subcategory | Peripheral Drivers |
| Technology | MOS |
| Terminal Position | ZIG-ZAG |
| Number of Functions | 2 |
| Supply Voltage | 12V |
| Reach Compliance Code | unknown |
| Base Part Number | BTS621L1 |
| Pin Count | 3 |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 3.5A |
| Supply Voltage-Max (Vsup) | 34V |
| Supply Voltage-Min (Vsup) | 5V |
| Interface | On/Off |
| Nominal Supply Current | 4mA |
| Output Configuration | High Side |
| Power Dissipation | 75W |
| Output Current | 3.5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5V~34V |
| Driver Number of Bits | 2 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Turn On Time | 400 μs |
| Output Peak Current Limit-Nom | 14A |
| Rds On (Typ) | 80m Ω |
| Turn Off Time | 400 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Length | 15.6mm |
| Width | 9.9mm |
| Thickness | 4.4mm |
| RoHS Status | Non-RoHS Compliant |
BTS621L1 Overview
As a result, it is packaged in the form of a Tube.Package TO-220-7 (Formed Leads) contains it.A Through Hole mounting is used for the LED driving board.There is a switch type of General Purpose.In order to guarantee reliable performance, the temperature should be set to -40°C~150°C TJ.There is a default setting of 2 for output.The LED driving board operates with a supply voltage of Not Required.The maximum output voltage is N-Channel volts.Auto Restart, Status Flag features are available on the lighting driver.It comes under the family of BTS621L1.The termination count is 7.7 pins are used for operation.There are 2 functions of the LED driver.Maximum output current falls to 3.5A when operation criteria are met.High efficiency is possible when the supply voltage is set to 12V.This lighting driver is mounted in the way of Through Hole.The LED driver has a total of 3 pins.The PROFET? series includes this electrical component.In this case, the output current is set to 3.5A.A self-contained container with a capacity of Peripheral Drivers contains this lighting driver.The Vsup value (maximum supply voltage) is set to 34V.In order for this lighting driver to operate normally, the supply voltage (Vsup) should remain above 5V.
BTS621L1 Features
Supplied from 12V
BTS621L1 Applications
There are a lot of Infineon Technologies BTS621L1 Power Switches ICs applications.
- Portable GPS
- Storage (HDDs, SSDs)
- USB Ports/Hubs
- Hard Disk Drives
- Hot Swaps
- Solid State Drivers
- Portable/Handheld Devices
- Storage Drives
- USB3.1 Power Delivery
- Hot Swap
