BTS640S2
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Surface Mount |
| Package / Case | TO-263-8, D2Pak (7 Leads + Tab), TO-263CA |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2003 |
| Series | PROFET® |
| Feature | Auto Restart, Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 85W |
| Technology | MOS |
| Terminal Position | ZIG-ZAG |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Reach Compliance Code | unknown |
| Base Part Number | BTS640S2 |
| Pin Count | 3 |
| JESD-30 Code | R-PZFM-T7 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 11.4A |
| Supply Voltage-Max (Vsup) | 34V |
| Supply Voltage-Min (Vsup) | 5V |
| Interface | On/Off |
| Nominal Supply Current | 1.2mA |
| Output Configuration | High Side |
| Power Dissipation | 85W |
| Output Current | 4A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5V~34V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 50A |
| Rds On (Typ) | 27m Ω |
| Turn Off Time | 200 μs |
| Built-in Protections | OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
BTS640S2 Overview
The package is in the form of a Tube.The TO-263-8, D2Pak (7 Leads + Tab), TO-263CA package contains it.The lighting driver is mounted in the Surface Mount position.It owns General Purpose switch type.It is recommended that the temperature be set to -40°C~150°C TJ for reliable operation.There are 1 outputs available on this lighting driver.A supply voltage of Not Required is required for it to operate.The maximum output voltage of this LED driver is N-Channel volts.Auto Restart, Status Flag features are available on the lighting driver.I believe it belongs to the BTS640S2 family.The termination count is 7.It has 1 functions.It is necessary to reduce the maximum output current to 11.4A to meet the operation criteria.A supply voltage of 12V leads to high efficiency.Through Hole is mounted in the way.It is equipped with a total of 3 pins.This electrical component is part of the PROFET? series.The output current is set to 4A in this case.This LED driver is self-contained in an econtainer with a capacity of Peripheral Drivers.Vsup (maximum supply voltage) is set to 34V.A normal operation requires that the supply voltage (Vsup) remain above 5V.
BTS640S2 Features
Supplied from 12V
BTS640S2 Applications
There are a lot of Infineon Technologies BTS640S2 Power Switches ICs applications.
- Hot Swap
- Portable GPS
- USB Ports/Hubs
- Low Voltage I/O System Power
- USB Protection
- Portable Music Players
- Hard Disk Drives
- HDD, SSD
- Handheld Devices
- Telecom and Network Systems
