BTS640S2S
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Surface Mount |
| Package / Case | TO-263-8, D2Pak (7 Leads + Tab), TO-263CA |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2007 |
| Series | PROFET® |
| Feature | Auto Restart, Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Subcategory | Peripheral Drivers |
| Technology | MOS |
| Terminal Position | SINGLE |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Reach Compliance Code | unknown |
| Base Part Number | BTS640S2 |
| Pin Count | 3 |
| JESD-30 Code | R-PSFM-T7 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 11.4A |
| Supply Voltage-Max (Vsup) | 34V |
| Supply Voltage-Min (Vsup) | 5V |
| Interface | On/Off |
| Nominal Supply Current | 1.2mA |
| Output Configuration | High Side |
| Power Dissipation | 85W |
| Output Current | 4A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5V~34V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 50A |
| Rds On (Typ) | 27m Ω |
| Turn Off Time | 200 μs |
| Built-in Protections | OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
BTS640S2S Overview
It is packaged in the form of a Tube.It is included with the TO-263-8, D2Pak (7 Leads + Tab), TO-263CA package as well.Mounting type Surface Mount is selected for the LED driving board.General Purpose is the type of switch owned by it.In order to guarantee reliable performance, the temperature should be set to -40°C~150°C TJ.By default, it is set to output 1.With a supply voltage of Not Required, the LED driving board operates.It produces a maximum output voltage of N-Channel volts at its maximum output.A lighting driver with Auto Restart, Status Flag features is available.This object belongs to the BTS640S2 family.As a result, there are 7 terminations.There are 1 functions of the LED driver.Maximum output current falls to 11.4A when operation criteria are met.As long as the supply voltage is 12V, high efficiency can be achieved.The lighting driver is mounted in the way of Through Hole.As a result, it has a total of 3 pins.A component of this type is included in the PROFET? series.The output current is set to 4A in this case.This LED driver is self-contained in an econtainer with a capacity of Peripheral Drivers.The maximum supply voltage for this LED driver is 34V (Vsup).For normal operation, the supply voltage (Vsup) should be kept above 5V.
BTS640S2S Features
Supplied from 12V
BTS640S2S Applications
There are a lot of Infineon Technologies BTS640S2S Power Switches ICs applications.
- Smartphone and PDA
- Hard Disk Drives
- Hot Swap
- HDD and SSD
- Wearable Devices
- Storage (HDDs, SSDs)
- USB Ports/Hubs
- Solid-State Drives
- Portable Devices
- PC Card Hot Swap
