BTS660P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-220-7 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2001 |
| Series | PROFET® |
| JESD-609 Code | e0 |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Terminal Finish | TIN LEAD |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 170W |
| Technology | MOS |
| Terminal Position | ZIG-ZAG |
| Number of Functions | 1 |
| Supply Voltage | 24V |
| Base Part Number | BTS660 |
| Pin Count | 3 |
| JESD-30 Code | R-PZFM-T7 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 38A |
| Supply Voltage-Max (Vsup) | 58V |
| Supply Voltage-Min (Vsup) | 5V |
| Interface | On/Off |
| Nominal Supply Current | 800μA |
| Output Configuration | High Side |
| Power Dissipation | 170W |
| Output Current | 38A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5V~58V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Turn On Time | 400 μs |
| Output Peak Current Limit-Nom | 90A |
| Rds On (Typ) | 7.2m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
BTS660P Overview
Tube is the way it's packaged.It's included in the TO-220-7 package.This LED driving board is mounted using the mounting type Through Hole.General Purpose is the type of switch owned by it.To ensure reliable operation, the temperature should be set to -40°C~150°C TJ.By default, it is set to output 1.Operation is based on a supply voltage of Not Required.A maximum output voltage of N-Channel volts has been specified.The BTS660 family consists of this type.It consists of 7 terminations in total.It consists of 1 functions.To comply with the operation criteria, the maximum output current is reduced to 38A.The supply voltage can be 24V for high efficiency.As a result, it is mounted in the manner of Through Hole.In total, it has 3 pins.It is part of the PROFET? series.As a result, the output current is set to 38A.The LED driver is packaged in an econtainer with a capacity of Peripheral Drivers.In this LED driver, the maximum supply voltage is configured to be 58V (Vsup).A normal operation requires that the supply voltage (Vsup) remain above 5V.
BTS660P Features
Supplied from 24V
BTS660P Applications
There are a lot of Infineon Technologies BTS660P Power Switches ICs applications.
- Hot Swap
- Storage Drives
- Smartphone and PDA
- HDD and SSD
- Wearable Devices
- Telecom and Network Systems
- Portable/Handheld Devices
- Portable GPS Device
- Hot Swaps
- Portable Video Game Players
